A cycle model of a multi-stage combined heat pump system, which includes the irreversibility of finite rate heat transfer across finite temperature differences and the irreversibilities inside the working fluid, is established and used to investigate the influence of these irreversibilities on the performance of the system. The profit of operating the heat pump system is taken as an objective function for optimization. The maximum profit is calculated for a given total heat transfer area or total thermal conductance of heat exchangers. The coefficient of performance, heating load, and power input at the maximum profit are determined. The distribution of the heat transfer areas or the thermal conductances of heat exchangers and the temperature ratios of the working fluids of two adjacent cycles in heat exchange processes are optimized. The results obtained here are generally significant. They are suitable for an arbitrary-stage irreversible and endo- reversible combined heat pump system. [S0195-0738(00)01104-3]

Issue Section:
Technical Papers
Keywords:
heat pumps, performance evaluation, irreversible thermodynamics, heat transfer, optimisation, thermal conductivity, heat exchangers, Combined Heat Pump Cycle, Irreversibility, Thermoeconomic Optimization, Profit, Coefficient of Performance, Heating Load, Power Input
Topics:
Heat pumps, Heat transfer, Heating, Optimization, Stress, Thermoeconomics, Heat exchangers, Temperature, Cycles, Fluids, Heat, Thermal conductivity
1.
Leff
,
H. S.
, and
Teeters
,
W. O.
,
1978
, “
EER, COP, and the Second Law Efficiency for Air Conditions
,”
Am. J. Phys.
,
46
, pp.
19
–
22
.
2.
Cheng
,
C. Y.
, and
Chen
,
C. K.
,
1995
, “
Performance Optimization of an Irreversible Heat Pump
,”
J. Phys. D:
28
, pp.
2451
–
2454
.
3.
Blanchard
,
C. H.
,
1980
, “
Coefficient of Performance for Finite Speed Heat Pump
,”
J. Appl. Phys.
,
51
, pp.
2471
–
2472
.
4.
Yan
,
Z.
, and
Chen
,
J.
,
1992
, “
Optimal Performance of an Irreversible Carnot Heat Pump
,”
Int. J. Energy Environ. Econ.
,
2
, pp.
63
–
66
.
5.
Wu
,
C.
,
1993
, “
Specific Heating Load of an Endoreversible Carnot Heat Pump
,”
Int. J. Amb. Energy
,
14
, pp.
25
–
28
.
6.
Chen, J., 1994, “General Performance Characteristics of an Irreversible Carnot Heat Pump,” Proc., Florence World Energy Research Symposium, E. Carnevale, G. Manfrida, and F. Martelli, eds., Florence, Italy, July 6–8, pp. 461–468.
7.
Chen
,
J.
, and
Wu
,
C.
,
1995
, “
Finite-Time Thermodynamic Analysis of a Two-Stage Combined Heat Pump System
,”
Int. J. Am. Energy
,
16
,
205
–
208
.
8.
Chen
,
J.
, and
Wu
,
C.
,
1995
, “
Performance of a Cascade Endoreversible Heat Pump System
,”
J. Inst. Energy
,
68
, pp.
137
–
141
.
9.
Chen
,
L.
,
Wu
,
C.
, and
Sun
,
F.
,
1997
, “
Heat Transfer Effect on the Specific Heating Load of Heat Pumps
,”
Appl. Therm. Eng.
,
17
, pp.
103
–
110
.
10.
Andresen, B., 1983, Finite-Time Thermodynamics, University of Copenhagen, Copenhagen.
11.
De Vos, A., 1992, Endoreversible Thermodynamics of Solar Energy Conversion, Oxford University Press, Oxford, England.
12.
El-Wakil, M. M., 1962, Nuclear Power Engineering, McGraw-Hill, New York, NY.
13.
Howe
,
J. P.
,
1982
, “
The Maximum Power, Heat Demand and Efficiency of a Heat Engine Operating in Steady State at Less Than Carnot Efficiency
,”
Energy (Oxford)
,
7
, pp.
401
–
402
.
14.
Wu
,
C.
, and
Kiang
,
L.
,
1992
, “
Finite-Time Thermodynamic Analysis of a Carnot Engine With Internal Irreversibility
,”
Energy (Oxford)
,
17
, pp.
1173
–
1178
.
15.
Ibrahim
,
O. M.
,
Klein
,
S. A.
, and
Mitchell
,
J. W.
,
1991
, “
Optimum Heat Power Cycles for Specified Boundary Conditions
,”
ASME J. Eng. Gas Turbines Power
,
113
, pp.
514
–
521
.
16.
Ibrahim
,
O. M.
,
Klein
,
S. A.
, and
Mitchell
,
J. W.
,
1992
, “
Efficiency of irreversibility and economics on the performance of a heat engine
,”
ASME J. Sol. Energy Eng.
,
114
, pp.
267
–
271
.
17.
Chen
,
J.
,
1998
, “
A Universal Model of an Irreversible Combined Carnot Cycle System and Its General Performance Characteristics
,”
J. Phys. A
,
31
, pp.
3383
–
3394
.
18.
Bejan
,
A.
,
1996
, “
Entropy Generation Minimization: The New Thermodynamics of Finite-Size Devices and Finite-Time Processes
,”
J. Appl. Phys.
,
79
, pp.
1191
–
1216
.
Copyright © 2000
 by ASME
You do not currently have access to this content.