An improved time-dependent analytical model is developed for predicting the maximum shearing displacement in an area-array electronic assembly under global thermal mismatch loading. The thermal loads are assumed to be uniform within the component and substrate, with both step-function and sinusoidal temperature histories being considered. The time-dependent effects in the array’s shear deformation are introduced in an approximate manner by modeling the interconnect material (solder) as a temperature-independent linear viscoelastic material. The viscoelastic constitutive law used for the solder is that of a three-parameter viscoelastic standard solid in distortion and an elastic solid in the hydrostatic mode. In the authors’ previous work the steady-state shear force in the joints was assumed to vary sinusoidally with a frequency-independent amplitude. This assumption has been relaxed in the present study, leading to improved accuracy. All results have been derived as closed-form correction factors to be applied to the easily calculated unconstrained shear displacement to obtain the maximum shear displacement. All the correction factors depend on prescribed geometric and material parameters of the component, substrate, and joints. The results have been presented in the form of dimensionless plots to aid in the analysis or design process, thereby providing convenient alternatives or supplements to time-consuming and expensive finite element analyses of entire assemblies.
Skip Nav Destination
e-mail: stephen.heinrich@marquette.edu
Article navigation
March 2004
Technical Papers
An Improved Analytical Model for Time-Dependent Shearing Deformation in Area-Array Interconnects
S. Shakya,
S. Shakya
Pujara Wirth Torke, Inc., Wauwatosa, WI 53226
Search for other works by this author on:
S. M. Heinrich,
e-mail: stephen.heinrich@marquette.edu
S. M. Heinrich
Department of Civil and Environmental Engineering, Marquette University, Milwaukee, WI 53201-1881
Search for other works by this author on:
P. S. Lee
P. S. Lee
Rockwell Automation, Milwaukee, WI 53204
Search for other works by this author on:
S. Shakya
Pujara Wirth Torke, Inc., Wauwatosa, WI 53226
S. M. Heinrich
Department of Civil and Environmental Engineering, Marquette University, Milwaukee, WI 53201-1881
e-mail: stephen.heinrich@marquette.edu
P. S. Lee
Rockwell Automation, Milwaukee, WI 53204
Contributed by the Electronic and Photonic Packaging Division for publication in the JOURNAL OF ELECTRONIC PACKAGING. Manuscript received Dec. 2002. Associate Editor: B. Michel.
J. Electron. Packag. Mar 2004, 126(1): 74-81 (8 pages)
Published Online: April 30, 2004
Article history
Received:
December 1, 2002
Online:
April 30, 2004
Citation
Shakya, S., Heinrich, S. M., and Lee, P. S. (April 30, 2004). "An Improved Analytical Model for Time-Dependent Shearing Deformation in Area-Array Interconnects ." ASME. J. Electron. Packag. March 2004; 126(1): 74–81. https://doi.org/10.1115/1.1648058
Download citation file:
26
Views
Get Email Alerts
Cited By
Sequential Versus Concurrent Effects in Combined Stress Solder Joint Reliability
J. Electron. Packag
Anand Model Constants of Sn-Ag-Cu Solders: What Do They Actually Mean?
J. Electron. Packag
Related Articles
An Analytical Model for Time-Dependent Shearing Deformation in Area-Array Interconnects
J. Electron. Packag (December,2000)
Measurement of Creep and Relaxation Behaviors of Wafer-Level CSP Assembly Using Moire´ Interferometry
J. Electron. Packag (June,2003)
Shearing Deformation in Partial Areal Arrays: Analytical Results
J. Electron. Packag (March,1998)
A Transversely Isotropic Viscoelastic Constitutive Equation for Brainstem Undergoing Finite Deformation
J Biomech Eng (December,2006)
Related Proceedings Papers
Related Chapters
Crack(s) in a Rod or a Plate by Energy Rate Analysis
The Stress Analysis of Cracks Handbook, Third Edition
Data Tabulations
Structural Shear Joints: Analyses, Properties and Design for Repeat Loading
Flexibility Analysis
Process Piping: The Complete Guide to ASME B31.3, Third Edition