... electrolyte with a thin electrolyte layer of 6μm composed of the synthesized 1Ce10ScSZ powders was fabricated using the tape-casting and co-sintering techniques for a solid oxide fuel cell (SOFC) single cell. The open-circuit voltage of the single cell thus obtained was 1.11 V at 750 °C, indicating the dense...

...Yaohui Zhang; Jiang Liu; Juan Yin Dense and microcrack free yttria-stabilized zirconia (YSZ) was deposited onto porous NiO-YSZ anode tubes by dip coating without any vacuum assistance. The anode tubes were prepared by slip casting. Open circuit voltage of 1.05 V was obtained at 800 ° C , implying...

...-temperature varying properties. A casting system used to manufacture a high-temperature PEMFC membrane—characterized as an incompressible power-law fluid exhibiting fully developed steady flow—has been conceptualized, theoretically modeled, and detail designed. The desired input (e.g., PBI/PA membrane...

... methodology can be used to develop a complete manufacturing system to fabricate a defect free film. Moreover, the casting method offers significant improvements for the thickness uniformity of the membrane film, compared with film that is fabricated using scaled laboratory processes. The pressure losses...

... to improve the properties of the materials at high temperature due to their characteristics of softly proton conductor and/or hygroscopicity. The membranes were prepared by the Doctor-Blade casting technique that permits a good check of the thickness and a good reproducibility. A commercial ZrO 2 was used...