Skip Nav Destination
Issues
October 2015
This article was originally published in
Journal of Fuel Cell Science and Technology
ISSN 1550-624X
EISSN 1551-6989
In this Issue
Research Papers
Effect of Channel Geometry on Formability of 304 Stainless Steel Bipolar Plates for Fuel Cells—Simulation and Experiments
J. Fuel Cell Sci. Technol. October 2015, 12(5): 051001.
doi: https://doi.org/10.1115/1.4031538
Topics:
Finite element analysis
,
Fuel cells
,
Geometry
,
Metal stamping
,
Modeling
,
Simulation
,
Stainless steel
,
Waves
,
Deformation
,
Plates (structures)
Causal and Fault Trees Analysis of Proton Exchange Membrane Fuel Cell Degradation
J. Fuel Cell Sci. Technol. October 2015, 12(5): 051002.
doi: https://doi.org/10.1115/1.4031584
Topics:
Fuel cells
,
Membranes
,
Probability
A Simple Analytical Model of a Direct Methanol Fuel Cell
J. Fuel Cell Sci. Technol. October 2015, 12(5): 051003.
doi: https://doi.org/10.1115/1.4031696
Topics:
Anodes
,
Catalysts
,
Direct methanol fuel cells
,
Flow (Dynamics)
,
Methanol
,
Oxygen
,
Current density
,
Membranes
,
Fuel cells
,
Proton exchange membranes
Effect of Temperature Fluctuation on Creep and Failure Probability for Planar Solid Oxide Fuel Cell
J. Fuel Cell Sci. Technol. October 2015, 12(5): 051004.
doi: https://doi.org/10.1115/1.4031697
Topics:
Anodes
,
Creep
,
Cycles
,
Failure
,
Probability
,
Solid oxide fuel cells
,
Stress
,
Temperature
,
Thermal stresses
,
Design
Water Transport in a PEMFC Based on the Difference in Capillary Pressure Between the Cathode Catalyst Layer and Microporous Layer
J. Fuel Cell Sci. Technol. October 2015, 12(5): 051005.
doi: https://doi.org/10.1115/1.4031774
Topics:
Catalysts
,
Floods
,
Gas diffusion layers
,
Pressure
,
Proton exchange membrane fuel cells
,
Water
,
Diffusion (Physics)
,
Water vapor
Three-Dimensional Numerical Analysis of Solid Oxide Electrolysis Cells Steam Electrolysis Operation for Hydrogen Production
J. Fuel Cell Sci. Technol. October 2015, 12(5): 051006.
doi: https://doi.org/10.1115/1.4031784
Topics:
Anodes
,
Electrodes
,
Electrolysis
,
High temperature steam
,
Hydrogen
,
Overvoltage
,
Porosity
,
Simulation
,
Simulation models
,
Solid oxide fuel cells
Carbon Deposition Simulation in Porous SOFC Anodes: A Detailed Numerical Analysis of Major Carbon Precursors
J. Fuel Cell Sci. Technol. October 2015, 12(5): 051007.
doi: https://doi.org/10.1115/1.4031862
Topics:
Carbon
,
Fuels
,
Equilibrium (Physics)
,
Methane
,
Solid oxide fuel cells
,
Temperature
,
Anodes
,
Simulation
Technical Brief
Experimental Characterization Method of the Gas Diffusion Layers Compression Modulus for High Compressive Loads and Based on a Dynamic Mechanical Analysis
J. Fuel Cell Sci. Technol. October 2015, 12(5): 054501.
doi: https://doi.org/10.1115/1.4031695
Topics:
Bulk modulus
,
Gas diffusion layers
,
Stress
,
Excitation
,
Compression
,
Experimental characterization
Email alerts
RSS Feeds
A Fault Diagnosis Method for Electric Vehicle Lithium Power Batteries Based on Dual-Feature Extraction From the Time and Frequency Domains
J. Electrochem. En. Conv. Stor (August 2025)
Optimization of thermal non-uniformity challenges in liquid-cooled lithium-ion battery packs using NSGA-II
J. Electrochem. En. Conv. Stor
Ultrasound-enabled adaptive protocol for fast charging of lithium-ion batteries
J. Electrochem. En. Conv. Stor
Effects of Sintering Temperature on the Electrical Performance of Ce0.8Sm0.2O1.9–Pr2NiO4 Composite Electrolyte for SOFCs
J. Electrochem. En. Conv. Stor (August 2025)
Joint Model Parameter Identification and EKF Algorithm for the SOC Estimation of LFP Battery
J. Electrochem. En. Conv. Stor
