This paper describes a simple and reliable method of fabricating an anode-side, substrate-supported (AS-SS) planar cell constructed of a porous 3YSZ support and thin, selective-area layers of NiO/YSZ anode, 8YSZ electrolyte, and LSM cathode sequentially coated on the support. Extension of triple phase boundary (TBP) at the electrode/electrolyte interfaces was done by coating SDC thin films within the pores of the electrodes using a sol-gel technique to improve performance of the cell. An anode-supported (AS) planar cell was produced using the same procedure and technique, thus expected to have identical cell components except for the anode morphology. The AS-SS planar cell exhibited a maximum power density of 0.85 Wcm−2 which is higher than the 0.60 Wcm−2 achieved from the AS planar cell at 800°C in humidified hydrogen versus air.
Skip Nav Destination
Article navigation
October 2011
This article was originally published in
Journal of Fuel Cell Science and Technology
Research Papers
Fabrication and Characterization of an Anode-Side, Substrate-Supported Planar SOFC
Nguyen Xuan Phuong Vo,
Nguyen Xuan Phuong Vo
Fuel Cell Research Center, Korea Institute of Science and Technology (KIST)
, Seoul, Korea
;Korea University of Science and Technology (UST)
, Daejeon, Korea
Search for other works by this author on:
Quang Nhu Ho,
Quang Nhu Ho
Fuel Cell Research Center, Korea Institute of Science and Technology (KIST)
, Seoul, Korea
Search for other works by this author on:
Tae-Hoon Lim,
Tae-Hoon Lim
Fuel Cell Research Center, Korea Institute of Science and Technology (KIST)
, Seoul, Korea
Search for other works by this author on:
Seong-Ahn Hong,
Seong-Ahn Hong
Fuel Cell Research Center, Korea Institute of Science and Technology (KIST)
, Seoul, Korea
Search for other works by this author on:
Suk Woo Nam,
Suk Woo Nam
Fuel Cell Research Center, Korea Institute of Science and Technology (KIST)
, Seoul, Korea
Search for other works by this author on:
Sung Pil Yoon
Sung Pil Yoon
Fuel Cell Research Center, Korea Institute of Science and Technology (KIST)
, Seoul, Korea
Search for other works by this author on:
Nguyen Xuan Phuong Vo
Fuel Cell Research Center, Korea Institute of Science and Technology (KIST)
, Seoul, Korea
;Korea University of Science and Technology (UST)
, Daejeon, Korea
Quang Nhu Ho
Fuel Cell Research Center, Korea Institute of Science and Technology (KIST)
, Seoul, Korea
Tae-Hoon Lim
Fuel Cell Research Center, Korea Institute of Science and Technology (KIST)
, Seoul, Korea
Seong-Ahn Hong
Fuel Cell Research Center, Korea Institute of Science and Technology (KIST)
, Seoul, Korea
Suk Woo Nam
Fuel Cell Research Center, Korea Institute of Science and Technology (KIST)
, Seoul, Korea
Sung Pil Yoon
Fuel Cell Research Center, Korea Institute of Science and Technology (KIST)
, Seoul, Korea
J. Fuel Cell Sci. Technol. Oct 2011, 8(5): 051004 (4 pages)
Published Online: June 13, 2011
Article history
Received:
March 12, 2010
Accepted:
May 3, 2011
Online:
June 13, 2011
Published:
June 13, 2011
Citation
Phuong Vo, N. X., Ho, Q. N., Lim, T., Hong, S., Nam, S. W., and Yoon, S. P. (June 13, 2011). "Fabrication and Characterization of an Anode-Side, Substrate-Supported Planar SOFC." ASME. J. Fuel Cell Sci. Technol. October 2011; 8(5): 051004. https://doi.org/10.1115/1.4004173
Download citation file:
53
Views
Get Email Alerts
Cited By
Optimization of Thermal Non-Uniformity Challenges in Liquid-Cooled Lithium-Ion Battery Packs Using NSGA-II
J. Electrochem. En. Conv. Stor (November 2025)
In Situ Synthesis of Nano PtRuW/WC Hydrogen Evolution Reaction Catalyst for Acid Hydrogen Evolution by a Microwave Method
J. Electrochem. En. Conv. Stor (November 2025)
Intelligently Constructing Polyaniline/Nickel Hydroxide Core–Shell Nanoflowers as Anode for Flexible Electrode-Enhanced Lithium-/Sodium-Ion Batteries
J. Electrochem. En. Conv. Stor (November 2025)
State of Health Estimation Method for Lithium-Ion Batteries Based on Multifeature Fusion and BO-BiGRU Model
J. Electrochem. En. Conv. Stor (November 2025)
Related Articles
Mixed-Fuels Fuel Cell Running on Methane-Air Mixture
J. Fuel Cell Sci. Technol (February,2006)
Stable Single-Chamber Solid Oxide Fuel Cells Based on Doped Ceria Electrolytes and La 0.5 Sr 0.5 CoO 3 as a New Cathode
J. Fuel Cell Sci. Technol (November,2006)
Modeling of Co-planar Type Single-Chamber Solid Oxide Fuel
Cells
J. Fuel Cell Sci. Technol (August,2011)
Fabrication of Anode-Supported Tubular Solid Oxide Fuel Cells by Slip Casting in Combination With Dip Coating Technique
J. Fuel Cell Sci. Technol (February,2010)
Related Proceedings Papers
Mixed-Fuels Fuel Cell Running on Methane-Air Mixture
FUELCELL2005
Related Chapters
Numerical Study on a Novel SOFC with Bi-Layer Interconnector
Inaugural US-EU-China Thermophysics Conference-Renewable Energy 2009 (UECTC 2009 Proceedings)
An Easy-to-Approach Comprehensive Model and Computation for SOFC Performance and Design Optimization
Inaugural US-EU-China Thermophysics Conference-Renewable Energy 2009 (UECTC 2009 Proceedings)
Accelerated Testing of Marine Grade Steels—A Localized Corrosion Approach
Corrosion in Natural Environments