Gadolina doped ceria (GDC) is a promising electrolyte for intermediate temperature solid oxide fuel cells (IT-SOFC). Dense layers of this material can be economically deposited by screen printing. However, the inks for this technique generally use organic compounds that can raise health and safety issues, as well as economical issues. In order to obtain a low-cost alternative to the generally accepted organic-based ink, four different blends of binders were considered to prepare water-based GDC inks. The systems were deposited onto green NiO/GDC anodes produced by tape casting and treated at 1673 K for 4 h. By choosing the right combination of solvents and binders, it was possible to obtain a dense crack-free film of GDC from a water-based system.
Skip Nav Destination
e-mail: sanson@istec.cnr.it
e-mail: mangifesta@istec.cnr.it
Article navigation
October 2010
This article was originally published in
Journal of Fuel Cell Science and Technology
Research Papers
Eco-Friendly Screen-Printing Inks of Gadolinia Doped Ceria
Alessandra Sanson,
e-mail: sanson@istec.cnr.it
Alessandra Sanson
Institute of Science and Technology for Ceramics (ISTEC)-CNR
, Via Granarolo 64, 48018 Faenza (Ravenna), Italy
Search for other works by this author on:
Edoardo Roncari,
Edoardo Roncari
Institute of Science and Technology for Ceramics (ISTEC)-CNR
, Via Granarolo 64, 48018 Faenza (Ravenna), Italy
Search for other works by this author on:
Stefano Boldrini,
Stefano Boldrini
Insitute of Biomedical Engineering (ISIB)-CNR
, Corso Stati Uniti 4, 35127 Padua, Italy
Search for other works by this author on:
Patrizia Mangifesta,
e-mail: mangifesta@istec.cnr.it
Patrizia Mangifesta
Institute of Science and Technology for Ceramics (ISTEC)-CNR
, Via Granarolo 64, 48018 Faenza (Ravenna), Italy
Search for other works by this author on:
Lioudmila Doubova
Lioudmila Doubova
Insitute for Energetics and Interphases (IENI)-CNR
, Corso Stati Uniti 4, 35127 Padua, Italy
Search for other works by this author on:
Alessandra Sanson
Institute of Science and Technology for Ceramics (ISTEC)-CNR
, Via Granarolo 64, 48018 Faenza (Ravenna), Italye-mail: sanson@istec.cnr.it
Edoardo Roncari
Institute of Science and Technology for Ceramics (ISTEC)-CNR
, Via Granarolo 64, 48018 Faenza (Ravenna), Italy
Stefano Boldrini
Insitute of Biomedical Engineering (ISIB)-CNR
, Corso Stati Uniti 4, 35127 Padua, Italy
Patrizia Mangifesta
Institute of Science and Technology for Ceramics (ISTEC)-CNR
, Via Granarolo 64, 48018 Faenza (Ravenna), Italye-mail: mangifesta@istec.cnr.it
Lioudmila Doubova
Insitute for Energetics and Interphases (IENI)-CNR
, Corso Stati Uniti 4, 35127 Padua, ItalyJ. Fuel Cell Sci. Technol. Oct 2010, 7(5): 051013 (5 pages)
Published Online: July 19, 2010
Article history
Received:
February 1, 2008
Revised:
March 3, 2009
Online:
July 19, 2010
Published:
July 19, 2010
Citation
Sanson, A., Roncari, E., Boldrini, S., Mangifesta, P., and Doubova, L. (July 19, 2010). "Eco-Friendly Screen-Printing Inks of Gadolinia Doped Ceria." ASME. J. Fuel Cell Sci. Technol. October 2010; 7(5): 051013. https://doi.org/10.1115/1.3120271
Download citation file:
Get Email Alerts
Cited By
Optimization of Thermal Non-Uniformity Challenges in Liquid-Cooled Lithium-Ion Battery Packs Using NSGA-II
J. Electrochem. En. Conv. Stor (November 2025)
In Situ Synthesis of Nano PtRuW/WC Hydrogen Evolution Reaction Catalyst for Acid Hydrogen Evolution by a Microwave Method
J. Electrochem. En. Conv. Stor (November 2025)
Intelligently Constructing Polyaniline/Nickel Hydroxide Core–Shell Nanoflowers as Anode for Flexible Electrode-Enhanced Lithium-/Sodium-Ion Batteries
J. Electrochem. En. Conv. Stor (November 2025)
State of Health Estimation Method for Lithium-Ion Batteries Based on Multifeature Fusion and BO-BiGRU Model
J. Electrochem. En. Conv. Stor (November 2025)
Related Articles
Cost-Effective Single Step Cofiring Process for Manufacturing Solid Oxide Fuel Cells Using HSC™ Anode
J. Fuel Cell Sci. Technol (April,2010)
Characterization of Anode-Supported Solid Oxide Fuel Cells With PSCF Cathode
J. Fuel Cell Sci. Technol (February,2009)
Analysis of Intermediate Temperature Solid Oxide Fuel Cell Transport Processes and Performance
J. Heat Transfer (December,2005)
Development and Characterization of Cathode-Supported SOFCs by Single-Step Cofiring Fabrication for Intermediate Temperature Operation
J. Fuel Cell Sci. Technol (August,2008)
Related Proceedings Papers
Related Chapters
Hot Melt Ink Printing with Focus on Customized Protective Layers for Metal and Silicon Structuring and Sacrificial Molds for Die Fabrication
International Conference on Instrumentation, Measurement, Circuits and Systems (ICIMCS 2011)
Printing Machine Condition Monitoring Based on Printing Image Texture
International Conference on Mechanical Engineering and Technology (ICMET-London 2011)
Determining Damaged Regions that Occur on the Printhead of High Speed Thermal Transfer Printers
International Conference on Computer Research and Development, 5th (ICCRD 2013)