Several cathodes working in hydrocarbons diluted atmospheres have been proposed for single-chamber solid oxide fuel cells (SOFCs) fabrication. But, few cathodes work well in propane. In this work, we propose a new stable cathode of (LSCO) for the single-chamber SOFCs, which works well in diluted propane atmospheres. For this purpose, powders of (CGO) for electrolytes and powders of (LSCO) for cathodes were prepared by sol-gel related techniques as pentadionate methods. These methods consist of preparing a solution from the acetates or pentadionates followed by a jellification. Then, the decomposition of the organic molecules is initiated, obtaining nanometric powders of the abovementioned compounds. In this way, we have obtained high purity powders of CGO and LSCO as confirmed by x-ray diffraction powder analysis. Microstructure was analyzed by SEM and TEM microscopy, the analysis of the powders obtained by sol-gel techniques shows a nanometric size grain and reactivity for sintering was studied in detail. Very high-density electrolytes ( of theoretical density) were obtained with better power density currents than in samples prepared by solid-state reaction samples. Uniaxial pressing ceria based electrolytes were prepared from these powders and characterized in one chamber reactor using propane as fuel and as cathode. Anodes were prepared from mixtures. Different gas mixtures of propane and air were prepared and tested at different flow rates in order to optimize electrical properties. Stable single-chamber fuel cells working in diluted propane atmospheres could be prepared with these materials.
Skip Nav Destination
e-mail: salva@icmab.es
Article navigation
November 2006
This article was originally published in
Journal of Fuel Cell Science and Technology
Research Papers
Stable Single-Chamber Solid Oxide Fuel Cells Based on Doped Ceria Electrolytes and as a New Cathode
Salvador Piñol
e-mail: salva@icmab.es
Salvador Piñol
Institut de Ciència de Materials de Barcelona (CSIC)
, Campus de la UAB, Bellaterra E-08193, Barcelona, Spain
Search for other works by this author on:
Salvador Piñol
Institut de Ciència de Materials de Barcelona (CSIC)
, Campus de la UAB, Bellaterra E-08193, Barcelona, Spaine-mail: salva@icmab.es
J. Fuel Cell Sci. Technol. Nov 2006, 3(4): 434-437 (4 pages)
Published Online: March 1, 2006
Article history
Received:
November 30, 2005
Revised:
March 1, 2006
Citation
Piñol, S. (March 1, 2006). "Stable Single-Chamber Solid Oxide Fuel Cells Based on Doped Ceria Electrolytes and as a New Cathode." ASME. J. Fuel Cell Sci. Technol. November 2006; 3(4): 434–437. https://doi.org/10.1115/1.2349525
Download citation file:
Get Email Alerts
Cited By
Optimization of Thermal Non-Uniformity Challenges in Liquid-Cooled Lithium-Ion Battery Packs Using NSGA-II
J. Electrochem. En. Conv. Stor (November 2025)
In Situ Synthesis of Nano PtRuW/WC Hydrogen Evolution Reaction Catalyst for Acid Hydrogen Evolution by a Microwave Method
J. Electrochem. En. Conv. Stor (November 2025)
Intelligently Constructing Polyaniline/Nickel Hydroxide Core–Shell Nanoflowers as Anode for Flexible Electrode-Enhanced Lithium-/Sodium-Ion Batteries
J. Electrochem. En. Conv. Stor (November 2025)
State of Health Estimation Method for Lithium-Ion Batteries Based on Multifeature Fusion and BO-BiGRU Model
J. Electrochem. En. Conv. Stor (November 2025)
Related Articles
Mixed-Fuels Fuel Cell Running on Methane-Air Mixture
J. Fuel Cell Sci. Technol (February,2006)
Fabrication and Characterization of an Anode-Side, Substrate-Supported Planar SOFC
J. Fuel Cell Sci. Technol (October,2011)
Development and Characterization of Cathode-Supported SOFCs by Single-Step Cofiring Fabrication for Intermediate Temperature Operation
J. Fuel Cell Sci. Technol (August,2008)
Development of Microtubular SOFCs
J. Fuel Cell Sci. Technol (August,2008)
Related Proceedings Papers
Related Chapters
Surface Analysis and Tools
Tribology of Mechanical Systems: A Guide to Present and Future Technologies
The Necessary Fine-Tuning of Process Management and Controls for Metallic Transformations during Manufacturing of Bearings: Application to M50NiL Steel
Bearing and Transmission Steels Technology
New Implications for Geo-Mechanism of the Sandstone Diagenesis, from Diagenetic Heterogeneity of Lenticular Sandbody in Shahejie Formation, Bohai Bay Basin
International Conference on Electronics, Information and Communication Engineering (EICE 2012)