Several experiments have proved that water in liquid phase can be present at the anode of a PEM fuel cell due to vapor condensation resulting in mass transport losses. Nevertheless, it is not yet well understood where exactly water tends to cumulate and how the design of the gas channel (GC) and gas diffusion layer (GDL) could be improved to limit water cumulation. In the present work, a three-dimensional lattice Boltzmann based model is implemented in order to simulate the water cumulation at the GC–GDL interface at the anode of a PEM fuel cell. The numerical model incorporates the H2–H2O mixture equation of state and spontaneously simulates phase separation phenomena. Different simulations are carried out varying pressure gradient, pore size, and relative height of the GDL. Results reveal that, once saturation conditions are reached, water tends to cumulate in two main regions: the upper and side walls of the GC and the GC–GDL interface, resulting in a limitation of the reactant diffusion from the GC to the GDL. Interestingly, the cumulation of liquid water at the interface is found to diminish as the relative height of the GDL increases.
Lattice Boltzmann Modeling of Water Cumulation at the Gas Channel-Gas Diffusion Layer Interface in Polymer Electrolyte Membrane Fuel Cells
Contributed by the Advanced Energy Systems Division of ASME for publication in the JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY. Manuscript received July 11, 2014; final manuscript received October 7, 2014; published online November 14, 2014. Editor: Nigel M. Sammes.
- Views Icon Views
- Share Icon Share
- Search Site
Maggiolo, D., Marion, A., and Guarnieri, M. (December 1, 2014). "Lattice Boltzmann Modeling of Water Cumulation at the Gas Channel-Gas Diffusion Layer Interface in Polymer Electrolyte Membrane Fuel Cells." ASME. J. Fuel Cell Sci. Technol. December 2014; 11(6): 061008. https://doi.org/10.1115/1.4028952
Download citation file: