The objective of this research is to predict how the placement of structural light guides within a column photobioreactor (PBR) affects the fluid mechanics and heat transfer of the system. The photobioreactor studied is modeled and analyzed using computational fluid dynamics (CFD). A bubble sparger provides carbon dioxide and mixing. Five different arrays and eight carbon dioxide volumetric flow rates are tested. Based on this setup, the bubble flow patterns, velocities, and temperature distributions are analyzed and the recommended placement of light guides is determined for predicting the growing conditions suitable for microalgae and other photosynthetic organisms.
References
1.
Ghasemi
, Y.
, Rasoul-Amini
, S.
, Naseri
, A.
, Montazeri-Najafabady
, N.
, Mobasher
, M.
, and Dabbagh
, F.
, 2012
, “Microalgae Biofuel Potentials (Review)
,” App. Biochem. Microbiol.
, 48
(2
), pp. 126
–144
.10.1134/S00036838120200682.
Pienkos
, P. T.
, Laurens
, L.
, and Aden
, A.
, 2011
, “Making Biofuel From Microalgae
,” Am. Sci.
, 99
(6
), pp. 474
–481
.10.1511/2011.93.4743.
Gao
, Y.
, Chapin
, G.
, Yuanjie
, L.
, Tang
, D.
, and Tweed
, C.
, 2012
, “Algae Biodiesel—A Feasibility Report
,” Chem. Central J.
, 6
(Suppl 1
), p. S1
.10.1186/1752-153X-6-S1-S14.
Molina Griam
, E.
, Acién Fernández
, F. G.
, García Camacho
, F.
, and Chisti
, Y.
, 1999
, “Photobiroeactors: Light Regime, Mass Transfer, and Scaleup
,” J. Biotechnol.
, 70
(1–3
), pp. 231
–247
.10.1016/S0168-1656(99)00078-45.
Kunjapur
, A. M.
, and Eldridge
, R. B.
, 2010
, “Photobioreactor Design for Commercial Biofuel Production From Microalgae
,” Indust. Eng. Chem. Res.
, 49
(8
), pp. 3516
–3526
.10.1021/ie901459u6.
Mortuza
, S. M.
, Kommareddy
, A.
, Gent
, S.
, and Anderson
, G.
, 2011
, “Computational and Experimental Investigation of Heat Transfer Within a Column Photobioreactor
,” ASME 2011 International Mechanical Engineering Congress & Exposition Denver
, CO, November 11–17, ASME
Paper No. IMECE2011-63947.10.1115/IMECE2011-639477.
Mortuza
, S. M.
, Kommareddy
, A.
, Gent
, S.
, and Anderson
, G.
, 2011
, “Computational and Experimental Investigation of Bubble Circulation Patterns Within a Column Photobioreactor
,” ASME 2011 5th International Conference on Energy Sustainability & 9th Fuel Cell Science, Engineering and Technology Conference
Washington, DC
, August 7–10, ASME
Paper No. ES2011-54205.10.1115/ES2011-542058.
Eriksen
, N. T.
, 2008
, “The Technology of Microalgal Culturing
,” Biotechnol. Lett.
, 30
(9
), pp. 1525
–1536
.10.1007/s10529-008-9740-39.
Morweiser
, M.
, Kruse
, O.
, Hankamer
, B.
, and Posten
, C.
, 2010
, “Developments and Perspectives of Photobioreactors for Biofuel Production
,” Appl. Microbiol. Biotechnol.
, 87
(4
), pp. 1291
–1301
.10.1007/s00253-010-2697-x10.
Xu
, L.
, Weathers
, P. J.
, Xiong
, X.-R.
, and Liu
, C.-Z.
, 2009
, “Microalgal Bioreactors: Challenges and Opportunities
,” Eng. Life Sci.
, 9
(3
), pp. 178
–189
.10.1002/elsc.20080011111.
Carvalho
, A. P.
, Silva
, S. O.
, Baptista
, J. M.
, and Malcata
, F. X.
, 2010
, “Light Requirements in Microalgal Photobioreactors: An Overview of Biophotonic Aspects
,” Appl. Microbiol. Biotechnol.
, 89
(5
), pp. 1275
–1288
.10.1007/s00253-010-3047-812.
Posten
, C.
, 2009
, “Design Principles of Photo-Bioreactors for Cultivation of Microalgae
,” Eng. Life Sci.
, 9
(3
), pp. 165
–177
.10.1002/elsc.20090000313.
Luo
, H.-P.
, and Al-Dahhan
, M. H.
, 2012
, “Airlift Column Photobioreactors for Porphyridium sp. Culturing: Part I. Effects of Hydrodynamics and Reactor Geometry
,” Biotechnol. Bioeng.
, 109
(4
), pp. 932
–941
.10.1002/bit.2436114.
Zijffers
, J.-W.
, Janssen
, M.
, Tramper
, J.
, and Wijffels
, R. H.
, 2008
, “Design Process of an Area-Efficient Photobioreactor
,” Mar. Biotechnol.
, 10
(4
), pp. 404
–415
.10.1007/s10126-007-9077-215.
Merchuk
, J. C.
, Garcia-Camacho
, F.
, and Molina-Grima
, E.
, 2007
, “Photobioreactor Design and Fluid Dynamics
,” Chem. Biochem. Eng. Q.
, 21
(4
), pp. 345
–355
.16.
Bari
, G. S.
, Gent
, S. P.
, Suess
, T. N.
, and Anderson
, G. A.
, 2012
, “Predicting Hydrodynamic and Heat Transfer Effects of Sparger Geometry and Placement Within a Column Photobioreactor Using Computational Fluid Dynamics
,” ASME 2012 6th International Conference on Energy Sustainability & 10th Fuel Science, Engineering and Technology Conference San Diego
, CA,
July 23–26, ASME
Paper No. ES2012-91139.10.1115/ES2012-9113917.
Bari
, G. S.
, Gent
, S. P.
, Suess
, T. N.
, and Anderson
, G. A.
, 2012
, “Hydrodynamic and Heat Transfer Effects of Different Sparger Spacings Within a Column Photobioreactor Using Computational Fluid Dynamics
,” ASME 2012 International Mechanical Engineering Congress & Exposition Houston
, TX, November 9–15, ASME
Paper No. IMECE2012-8789810.1115/IMECE2012-87898.18.
Munson
, B. R.
, Young
, D. F.
, Okiishi
, T. H.
, and Huebsch
, W. W.
, 2009
, Fundamentals of Fluid Mechanics
, 6th ed., John Wiley and Sons
, Hoboken, NJ
.19.
El Wakil
, M. M.
, Ueyhara
, O. A.
, and Myers
, P. S.
, 1954
, “A Theoretical Investigation of the Heating-Up Period of Injected Fuel Droplets Vaporizing in Air
,” NACA Tech. Note 3179.20.
Ranz
, W. E.
, and Marshall
, W. R.
, 1952
, “Evaporation From Drops Parts I and II
,” Chem. Eng. Prog.
, 48
(3
), p. 141
.Copyright © 2014 by ASME
You do not currently have access to this content.
