Granular damping, which possesses promising features for vibration suppression in harsh environments such as in turbo-machinery and spacecraft, has been studied using empirical analysis and more recently using the discrete element method (DEM). The mechanism of granular damping is nonlinear and, when numerical analyses are employed, usually a relatively long simulation time of structural vibration is needed to reflect the damping behavior. The present research explores the granular damping analysis by means of the direct simulation Monte Carlo (DSMC) approach. Unlike the DEM that tracks the motion of granules based upon the direct numerical integration of Newton’s equations, the DSMC is a statistical method derived from the Boltzmann equation to describe the velocity evolution of the granular system. Since the exact time and locations of contacts among granules are not calculated in the DSMC, a significant reduction in computational time/cost can be achieved. While the DSMC has been exercised in a variety of gas/granular systems, its implementation to granular damping analysis poses unique challenges. In this research, we develop a new method that enables the coupled analysis of the stochastic granular motion and the structural vibration. The complicated energy transfer and dissipation due to the collisions between the granules and the host structure and among the granules is directly analyzed, which is essential to damping evaluation. Also, the effects of granular packing ratio and the excluded volume of granules, which may not be considered in the conventional DSMC approach, are explicitly incorporated in the analysis. A series of numerical studies are performed to highlight the accuracy and efficiency of the new approach.
Skip Nav Destination
e-mail: jtang@engr.uconn.edu
Article navigation
April 2007
Research Papers
A Direct Simulation Monte Carlo Approach for the Analysis of Granular Damping
X. Fang,
X. Fang
Department of Mechanical Engineering,
University of Connecticut
, 191 Auditorium Road, Unit 3139, Storrs, CT 06269
Search for other works by this author on:
J. Tang
J. Tang
Department of Mechanical Engineering,
e-mail: jtang@engr.uconn.edu
University of Connecticut
, 191 Auditorium Road, Unit 3139, Storrs, CT 06269
Search for other works by this author on:
X. Fang
Department of Mechanical Engineering,
University of Connecticut
, 191 Auditorium Road, Unit 3139, Storrs, CT 06269
J. Tang
Department of Mechanical Engineering,
University of Connecticut
, 191 Auditorium Road, Unit 3139, Storrs, CT 06269e-mail: jtang@engr.uconn.edu
J. Comput. Nonlinear Dynam. Apr 2007, 2(2): 180-189 (10 pages)
Published Online: November 13, 2006
Article history
Received:
August 23, 2006
Revised:
November 13, 2006
Citation
Fang, X., and Tang, J. (November 13, 2006). "A Direct Simulation Monte Carlo Approach for the Analysis of Granular Damping." ASME. J. Comput. Nonlinear Dynam. April 2007; 2(2): 180–189. https://doi.org/10.1115/1.2447502
Download citation file:
Get Email Alerts
Cited By
An Efficient Analysis of Amplitude and Phase Dynamics in Networked MEMS-Colpitts Oscillators
J. Comput. Nonlinear Dynam (January 2025)
A Comparative Analysis Among Dynamics Modeling Approaches for Space Manipulator Systems
J. Comput. Nonlinear Dynam (January 2025)
A Finite Difference-Based Adams-Type Approach for Numerical Solution of Nonlinear Fractional Differential Equations: A Fractional Lotka–Volterra Model as a Case Study
J. Comput. Nonlinear Dynam (January 2025)
Nonlinear Dynamic Analysis of Riemann–Liouville Fractional-Order Damping Giant Magnetostrictive Actuator
J. Comput. Nonlinear Dynam (January 2025)
Related Articles
Coupling Simulation Algorithm of Dynamic Feature of a Plate With Particle Dampers Under Centrifugal Loads
J. Vib. Acoust (August,2011)
Vibration Mitigation Using Passive Active Tunable (PAT) System: Experimental Aspects
J. Vib. Acoust (April,2007)
Granular Damping in Forced Vibration: Qualitative and Quantitative Analyses
J. Vib. Acoust (August,2006)
Acceleration-Driven-Damper (ADD): An Optimal Control Algorithm For Comfort-Oriented Semiactive Suspensions
J. Dyn. Sys., Meas., Control (June,2005)
Related Proceedings Papers
Related Chapters
Optimization of an Irregular 2D Packing Problem by a Genetic-Based Heuristic Algorithm
International Conference on Computer and Automation Engineering, 4th (ICCAE 2012)
Fundamentals of Structural Dynamics
Flow Induced Vibration of Power and Process Plant Components: A Practical Workbook
Supporting Systems/Foundations
Handbook on Stiffness & Damping in Mechanical Design