Mechanical interaction of cell with extracellular environment affects its function. The mechanisms by which mechanical stimuli are sensed and transduced into biochemical responses are still not well understood. Considering this, two finite element (FE) bendo-tensegrity models of a cell in different states are proposed with the aim to characterize cell deformation under different mechanical loading conditions: a suspended cell model elucidating the global response of cell in tensile test simulation and an adherent cell model explicating its local response in atomic force microscopy (AFM) indentation simulation. The force-elongation curve obtained from tensile test simulation lies within the range of experimentally obtained characteristics of smooth muscle cells (SMCs) and illustrates a nonlinear increase in reaction force with cell stretching. The force-indentation curves obtained from indentation simulations lie within the range of experimentally obtained curves of embryonic stem cells (ESCs) and exhibit the influence of indentation site on the overall reaction force of cell. Simulation results have demonstrated that actin filaments (AFs) and microtubules (MTs) play a crucial role in the cell stiffness during stretching, whereas actin cortex (AC) along with actin bundles (ABs) and MTs are essential for the cell rigidity during indentation. The proposed models quantify the mechanical contribution of individual cytoskeletal components to cell mechanics and the deformation of nucleus under different mechanical loading conditions. These results can aid in better understanding of structure-function relationships in living cells.
Skip Nav Destination
Article navigation
October 2018
Research-Article
A Finite Element Bendo-Tensegrity Model of Eukaryotic Cell
Yogesh Deepak Bansod,
Yogesh Deepak Bansod
Faculty of Mechanical Engineering (FME),
Institute of Solid Mechanics, Mechatronics and
Biomechanics (ISMMB),
Brno University of Technology (BUT),
Technicka 2896/2,
Brno 61669, Czech Republic
e-mail: yogeshbansod@gmail.com
Institute of Solid Mechanics, Mechatronics and
Biomechanics (ISMMB),
Brno University of Technology (BUT),
Technicka 2896/2,
Brno 61669, Czech Republic
e-mail: yogeshbansod@gmail.com
Search for other works by this author on:
Takeo Matsumoto,
Takeo Matsumoto
Biomechanics Laboratory,
Department of Mechanical Engineering,
Nagoya Institute of Technology,
Gokiso-cho, Showa-ku,
Nagoya 466-8555, Japan
e-mail: takeo@nagoya-u.jp
Department of Mechanical Engineering,
Nagoya Institute of Technology,
Gokiso-cho, Showa-ku,
Nagoya 466-8555, Japan
e-mail: takeo@nagoya-u.jp
Search for other works by this author on:
Kazuaki Nagayama,
Kazuaki Nagayama
Biomechanics Laboratory,
Department of Mechanical Engineering,
Nagoya Institute of Technology,
Gokiso-cho, Showa-ku,
Nagoya 466-8555, Japan
e-mail: kazuaki.nagayama.bio@vc.ibaraki.ac.jp
Department of Mechanical Engineering,
Nagoya Institute of Technology,
Gokiso-cho, Showa-ku,
Nagoya 466-8555, Japan
e-mail: kazuaki.nagayama.bio@vc.ibaraki.ac.jp
Search for other works by this author on:
Jiri Bursa
Jiri Bursa
Faculty of Mechanical Engineering (FME),
Institute of Solid Mechanics, Mechatronics and
Biomechanics (ISMMB),
Brno University of Technology (BUT),
Brno 61669, Czech Republic
e-mail: bursa@fme.vutbr.cz
Institute of Solid Mechanics, Mechatronics and
Biomechanics (ISMMB),
Brno University of Technology (BUT),
Technicka 2896/2
,Brno 61669, Czech Republic
e-mail: bursa@fme.vutbr.cz
Search for other works by this author on:
Yogesh Deepak Bansod
Faculty of Mechanical Engineering (FME),
Institute of Solid Mechanics, Mechatronics and
Biomechanics (ISMMB),
Brno University of Technology (BUT),
Technicka 2896/2,
Brno 61669, Czech Republic
e-mail: yogeshbansod@gmail.com
Institute of Solid Mechanics, Mechatronics and
Biomechanics (ISMMB),
Brno University of Technology (BUT),
Technicka 2896/2,
Brno 61669, Czech Republic
e-mail: yogeshbansod@gmail.com
Takeo Matsumoto
Biomechanics Laboratory,
Department of Mechanical Engineering,
Nagoya Institute of Technology,
Gokiso-cho, Showa-ku,
Nagoya 466-8555, Japan
e-mail: takeo@nagoya-u.jp
Department of Mechanical Engineering,
Nagoya Institute of Technology,
Gokiso-cho, Showa-ku,
Nagoya 466-8555, Japan
e-mail: takeo@nagoya-u.jp
Kazuaki Nagayama
Biomechanics Laboratory,
Department of Mechanical Engineering,
Nagoya Institute of Technology,
Gokiso-cho, Showa-ku,
Nagoya 466-8555, Japan
e-mail: kazuaki.nagayama.bio@vc.ibaraki.ac.jp
Department of Mechanical Engineering,
Nagoya Institute of Technology,
Gokiso-cho, Showa-ku,
Nagoya 466-8555, Japan
e-mail: kazuaki.nagayama.bio@vc.ibaraki.ac.jp
Jiri Bursa
Faculty of Mechanical Engineering (FME),
Institute of Solid Mechanics, Mechatronics and
Biomechanics (ISMMB),
Brno University of Technology (BUT),
Brno 61669, Czech Republic
e-mail: bursa@fme.vutbr.cz
Institute of Solid Mechanics, Mechatronics and
Biomechanics (ISMMB),
Brno University of Technology (BUT),
Technicka 2896/2
,Brno 61669, Czech Republic
e-mail: bursa@fme.vutbr.cz
1Corresponding author.
Manuscript received September 15, 2016; final manuscript received April 30, 2018; published online June 21, 2018. Editor: Victor H. Barocas.
J Biomech Eng. Oct 2018, 140(10): 101001 (9 pages)
Published Online: June 21, 2018
Article history
Received:
September 15, 2016
Revised:
April 30, 2018
Citation
Bansod, Y. D., Matsumoto, T., Nagayama, K., and Bursa, J. (June 21, 2018). "A Finite Element Bendo-Tensegrity Model of Eukaryotic Cell." ASME. J Biomech Eng. October 2018; 140(10): 101001. https://doi.org/10.1115/1.4040246
Download citation file:
Get Email Alerts
Related Articles
Biophysical Analysis of Dystrophic and Osteogenic Models of Valvular Calcification
J Biomech Eng (February,2015)
Simultaneous Analysis of Elastic and Nonspecific Adhesive Properties of Thin Sample and Biological Cell Considering Bottom Substrate Effect
J Biomech Eng (September,2017)
Cellular Microbiaxial Stretching to Measure a Single-Cell Strain Energy Density Function
J Biomech Eng (July,2017)
Simulated Bioprosthetic Heart Valve Deformation under Quasi-Static Loading
J Biomech Eng (November,2005)
Related Proceedings Papers
Related Chapters
Data Tabulations
Structural Shear Joints: Analyses, Properties and Design for Repeat Loading
Introduction and Definitions
Handbook on Stiffness & Damping in Mechanical Design
Supporting Systems/Foundations
Handbook on Stiffness & Damping in Mechanical Design