The nonlinear response of initially imperfect composite plates with piezoelectric actuators is investigated. The nonlinearity is limited to the prebuckling regime, where higher order terms present in the strain energy expression can be neglected. The advantage of the electromechanical coupling is exploited in two ways. First, the in-plane piezoelectric stress stiffening effect is used to tailor a stress distribution that inherently increases the critical buckling loads of perfect composite plates by posing an optimization problem that efficiently handles eventual uncertainties involved in the application of mechanical loadings. Second, piezoelectric bending moments are applied in order to avoid or ameliorate the undesirable effects of initial imperfections. An actuation strategy, where the piezoelectric membrane forces and bending moments are decomposed via an appropriate selection of voltages applied to piezoelectric patches that are symmetrically bonded to the top and bottom surfaces of the plate, is proposed and shown to be effective.
Skip Nav Destination
e-mail: arfaria@ita.br
e-mail: doguaman@ryerson.ca
e-mail: donadon@ita.br
Article navigation
Research Papers
Prebuckling Enhancement of Imperfect Composite Plates Using Piezoelectric Actuators
Alfredo R. de Faria,
Alfredo R. de Faria
Associate Professor
Department of Mechanical Engineering,
e-mail: arfaria@ita.br
Instituto Tecnológico de Aeronáutica, CTA-ITA-IEM
, São José dos Campos, SP 12228-900, Brazil
Search for other works by this author on:
Donatus C. D. Oguamanam,
Donatus C. D. Oguamanam
Associate Professor
Mem. ASME
Department of Mechanical and Industrial Engineering,
e-mail: doguaman@ryerson.ca
Ryerson University
, Toronto, ON, M5B 2K3, Canada
Search for other works by this author on:
Maurício V. Donadon
Maurício V. Donadon
Assistant Professor
Department of Aeronautical Engineering,
e-mail: donadon@ita.br
Instituto Tecnológico de Aeronáutica, CTA-ITA-IEM
, São José dos Campos, SP 12228-900, Brazil
Search for other works by this author on:
Alfredo R. de Faria
Associate Professor
Department of Mechanical Engineering,
Instituto Tecnológico de Aeronáutica, CTA-ITA-IEM
, São José dos Campos, SP 12228-900, Brazile-mail: arfaria@ita.br
Donatus C. D. Oguamanam
Associate Professor
Mem. ASME
Department of Mechanical and Industrial Engineering,
Ryerson University
, Toronto, ON, M5B 2K3, Canadae-mail: doguaman@ryerson.ca
Maurício V. Donadon
Assistant Professor
Department of Aeronautical Engineering,
Instituto Tecnológico de Aeronáutica, CTA-ITA-IEM
, São José dos Campos, SP 12228-900, Brazile-mail: donadon@ita.br
J. Appl. Mech. May 2011, 78(3): 031007 (8 pages)
Published Online: February 7, 2011
Article history
Received:
November 11, 2009
Revised:
December 27, 2010
Posted:
January 4, 2011
Published:
February 7, 2011
Online:
February 7, 2011
Citation
de Faria, A. R., Oguamanam, D. C. D., and Donadon, M. V. (February 7, 2011). "Prebuckling Enhancement of Imperfect Composite Plates Using Piezoelectric Actuators." ASME. J. Appl. Mech. May 2011; 78(3): 031007. https://doi.org/10.1115/1.4003352
Download citation file:
Get Email Alerts
Cited By
Sound Mitigation by Metamaterials With Low-Transmission Flat Band
J. Appl. Mech (January 2025)
Deformation-Dependent Effective Vascular Permeability of a Biological Tissue Containing Parallel Microvessels
J. Appl. Mech (January 2025)
Mechanics of a Tunable Bistable Metamaterial With Shape Memory Polymer
J. Appl. Mech (January 2025)
Related Articles
Small-Amplitude Free-Vibration Analysis of Piezoelectric Composite Plates Subject to Large Deflections and Initial Stresses
J. Vib. Acoust (February,2006)
Analysis and Limit State Design of Stiffened Plates and Shells: A World View
Appl. Mech. Rev (March,2009)
Mechanics of electroelastic bodies under biasing fields
Appl. Mech. Rev (May,2004)
Asymmetric Secondary Buckling in Monosymmetric Sandwich
Struts
J. Appl. Mech (September,2005)
Related Chapters
Buckling of Plates
Stress in ASME Pressure Vessels, Boilers, and Nuclear Components
Buckling of Plates
Design of Plate and Shell Structures
Free Vibration and Buckling Analysis of Rectangular Plates under Nonuniform Normal In-Plane Loading
International Conference on Mechanical and Electrical Technology 2009 (ICMET 2009)