This paper presents the derivation of a new beam theory with the sixth-order differential equilibrium equations for the analysis of shear deformable beams. A sixth-order beam theory is desirable since the displacement constraints of some typical shear flexible beams clearly indicate that the boundary conditions corresponding to these constraints can be properly satisfied only by the boundary conditions associated with the sixth-order differential equilibrium equations as opposed to the fourth-order equilibrium equations in Timoshenko beam theory. The present beam theory is composed of three parts: the simple third-order kinematics of displacements reduced from the higher-order displacement field derived previously by the authors, a system of sixth-order differential equilibrium equations in terms of two generalized displacements and of beam cross sections, and three boundary conditions at each end of shear deformable beams. A technique for the analytical solution of the new beam theory is also presented. To demonstrate the advantages and accuracy of the new sixth-order beam theory for the analysis of shear flexible beams, the proposed beam theory is applied to solve analytically three classical beam bending problems to which the fourth-order beam theory of Timoshenko has created some questions on the boundary conditions. The present solutions of these examples agree well with the elasticity solutions, and in particular they also show that the present sixth-order beam theory is capable of characterizing some boundary layer behavior near the beam ends or loading points.
Skip Nav Destination
e-mail: voyiadjis@eng.lsu.edu
Article navigation
March 2011
Research Papers
A Sixth-Order Theory of Shear Deformable Beams With Variational Consistent Boundary Conditions
George Z. Voyiadjis
George Z. Voyiadjis
Department of Civil and Environmental Engineering,
e-mail: voyiadjis@eng.lsu.edu
Louisiana State University
, Baton Rouge, LA 70803
Search for other works by this author on:
Guangyu Shi
George Z. Voyiadjis
Department of Civil and Environmental Engineering,
Louisiana State University
, Baton Rouge, LA 70803e-mail: voyiadjis@eng.lsu.edu
J. Appl. Mech. Mar 2011, 78(2): 021019 (11 pages)
Published Online: December 20, 2010
Article history
Received:
September 4, 2009
Revised:
September 18, 2010
Posted:
September 21, 2010
Published:
December 20, 2010
Online:
December 20, 2010
Citation
Shi, G., and Voyiadjis, G. Z. (December 20, 2010). "A Sixth-Order Theory of Shear Deformable Beams With Variational Consistent Boundary Conditions." ASME. J. Appl. Mech. March 2011; 78(2): 021019. https://doi.org/10.1115/1.4002594
Download citation file:
Get Email Alerts
Hamiltonian System-Based Symplectic Framework for Analytical Vibration Analysis of Microplates
J. Appl. Mech (December 2024)
Related Articles
On Timoshenko Beams of Rectangular Cross-Section
J. Appl. Mech (May,2004)
Generalized Bending of a Large, Shear Deformable Isotropic Plate Containing a Circular Hole or Rigid Inclusion
J. Appl. Mech (March,2001)
Comparison of Three-Dimensional Flexible Beam Elements for Dynamic Analysis: Classical Finite Element Formulation and Absolute Nodal Coordinate Formulation
J. Comput. Nonlinear Dynam (January,2010)
Dynamic Stiffness Analysis of a Beam Based on Trigonometric Shear Deformation Theory
J. Vib. Acoust (February,2008)
Related Proceedings Papers
Related Chapters
Mechanics of Long Beam Columns
Mechanics of Drillstrings and Marine Risers
Static Deformations Budget
Mechanics of Accuracy in Engineering Design of Machines and Robots Volume II: Stiffness and Metrology
Cavitating Structures at Inception in Turbulent Shear Flow
Proceedings of the 10th International Symposium on Cavitation (CAV2018)