A finite element dynamic instability analysis of stiffened shell panels with cutout subjected to uniform in-plane harmonic edge loading along the two opposite edges is presented in this paper. The eight-noded isoparametric degenerated shell element and a compatible three-noded curved beam element are used to model the shell panels and the stiffeners, respectively. As the usual formulation of degenerated beam element is found to overestimate the torsional rigidity, an attempt has been made to reformulate it in an efficient manner. Moreover the new formulation for the beam element requires five degrees of freedom per node as that of shell element. Bolotin method is applied to analyze the dynamic instability regions. Numerical results of convergence studies are presented and comparison is made with the published results from literature. The effects of various parameters such as shell geometry, radius of curvature, cutout size, stiffening scheme, and dynamic load factors are considered in dynamic instability analysis of stiffened shell panels with cutout. The free vibration and static stability (buckling) results are also presented. With the consideration of radius of curvatures the panels reduce from deep shell case to shallow shell case and finally become flat plate.
Skip Nav Destination
e-mail: shuvendu_patel@yahoo.co.in
e-mail: pkdatta@aero.iitkgp.ernet.in
e-mail: ahsheikh@civeng.adelaide.edu.au
Article navigation
July 2009
Research Papers
Dynamic Stability Analysis of Stiffened Shell Panels With Cutouts
S. N. Patel,
S. N. Patel
Research Student
Department of Aerospace Engineering,
e-mail: shuvendu_patel@yahoo.co.in
Indian Institute of Technology Kharagpur
, Kharagpur, 721 302 West Bengal, India
Search for other works by this author on:
P. K. Datta,
P. K. Datta
Professor
Department of Aerospace Engineering,
e-mail: pkdatta@aero.iitkgp.ernet.in
Indian Institute of Technology Kharagpur
, Kharagpur, 721 302 West Bengal, India
Search for other works by this author on:
A. H. Sheikh
A. H. Sheikh
Associate Professor
School of Civil, Environmental and Mining Engineering,
e-mail: ahsheikh@civeng.adelaide.edu.au
University of Adelaide
, Adelaide, South Australia 5005, Australia
Search for other works by this author on:
S. N. Patel
Research Student
Department of Aerospace Engineering,
Indian Institute of Technology Kharagpur
, Kharagpur, 721 302 West Bengal, Indiae-mail: shuvendu_patel@yahoo.co.in
P. K. Datta
Professor
Department of Aerospace Engineering,
Indian Institute of Technology Kharagpur
, Kharagpur, 721 302 West Bengal, Indiae-mail: pkdatta@aero.iitkgp.ernet.in
A. H. Sheikh
Associate Professor
School of Civil, Environmental and Mining Engineering,
University of Adelaide
, Adelaide, South Australia 5005, Australiae-mail: ahsheikh@civeng.adelaide.edu.au
J. Appl. Mech. Jul 2009, 76(4): 041004 (13 pages)
Published Online: April 22, 2009
Article history
Received:
April 17, 2007
Revised:
January 2, 2009
Published:
April 22, 2009
Citation
Patel, S. N., Datta, P. K., and Sheikh, A. H. (April 22, 2009). "Dynamic Stability Analysis of Stiffened Shell Panels With Cutouts." ASME. J. Appl. Mech. July 2009; 76(4): 041004. https://doi.org/10.1115/1.3086595
Download citation file:
Get Email Alerts
Cited By
Sound Mitigation by Metamaterials With Low-Transmission Flat Band
J. Appl. Mech (January 2025)
Deformation-Dependent Effective Vascular Permeability of a Biological Tissue Containing Parallel Microvessels
J. Appl. Mech (January 2025)
Mechanics of a Tunable Bistable Metamaterial With Shape Memory Polymer
J. Appl. Mech (January 2025)
Related Articles
A Simple Formula for Evaluating the Fundamental Frequency Parameter of Initially Stressed Uniform Beams on Elastic Foundation
J. Vib. Acoust (July,2002)
Small-Amplitude Free-Vibration Analysis of Piezoelectric Composite Plates Subject to Large Deflections and Initial Stresses
J. Vib. Acoust (February,2006)
Free Vibration of Thermally Buckled Composite Sandwich Plates
J. Vib. Acoust (February,2006)
Vibrations of Complete Spherical Shells With Imperfections
J. Vib. Acoust (June,2007)
Related Proceedings Papers
Related Chapters
Free Vibration and Buckling Analysis of Rectangular Plates under Nonuniform Normal In-Plane Loading
International Conference on Mechanical and Electrical Technology 2009 (ICMET 2009)
Subsection NB—Class 1 Components
Companion Guide to the ASME Boiler and Pressure Vessel Code, Volume 1, Third Edition
Subsection NE—Class MC Components
Companion Guide to the ASME Boiler & Pressure Vessel Codes, Volume 1 Sixth Edition