Abstract
By utilizing the Hamilton principle and the consistent linearization of the fully nonlinear beam theory, two coupled governing differential equations for a rotating inclined beam are derived. Both the extensional deformation and the Coriolis force effect are considered. It is shown that the vibration system can be considered as the superposition of a static subsystem and a dynamic subsystem. The method of Frobenius is used to establish the exact series solutions of the system. Several frequency relations that provide general qualitative relations between the natural frequencies and the physical parameters are revealed without numerical analysis. Finally, numerical results are given to illustrate the general qualitative relations and the influence of the physical parameters on the natural frequencies of the dynamic system.
Issue Section:
Technical
Papers
1.
Leissa
, A.
, 1981, “Vibrational Aspects of Rotating Turbomachinery Blades
,” Appl. Mech. Rev.
0003-6900, 34
, pp. 629
–635
.2.
Ramamurti
, V.
, and Balasubramanian
, P.
, 1984, “Analysis of Turbomachine Blades: A Review
,” Shock Vib. Dig.
0583-1024, 16
, pp. 13
–28
.3.
Rao
, J. S.
, 1987, “Turbomachine Blade Vibration
,” Shock Vib. Dig.
0583-1024, 19
, pp. 3
–10
.4.
Young
, T. H.
, and Lin
, T. M.
, 1998, “Stability of Rotating Pretwisted, Tapered Beams with Randomly Varying Speeds
,” ASME J. Vibr. Acoust.
0739-3717, 120
, pp. 784
–790
.5.
Rao
, J. S.
, and Carnegie
, W.
, 1972, “Nonlinear Vibrations of Rotating Cantilever Blades Treated by the Ritz Averaging Process
,” Aeronaut. J.
0001-9240, 76
, pp. 566
–569
.6.
Ko
, C. L.
, 1989, “Dynamic Analysis for Free Vibrations of Rotating Sandwich Tapered Beams
,” AIAA J.
0001-1452, 27
, pp. 1425
–1433
.7.
Boyce
, W. E.
, 1956, “Effect of Hub Radius on the Vibrations of a Uniform Bar
,” J. Appl. Mech.
0021-8936, 23
, pp. 287
–290
.8.
Lin
, S. M.
, Wu
, C. T.
, and Lee
, S. Y.
, 2003, “Analysis of Rotating Nonuniform Pretwisted Beams with an Elastically Restrained Root and a Tip Mass
,” Int. J. Mech. Sci.
0020-7403, 45
, pp. 741
–755
.9.
Chung
, J.
, and Yoo
, H. H.
, 2002, “Dynamic Analysis of a Rotating Cantilever Beam by Using the Finite Element Method
,” J. Sound Vib.
0022-460X, 249
, pp. 147
–164
.10.
Fung
, E. H. K.
, and Yau
, D. T. W.
, 1999, “Effects of Centrifugal Stiffening on the Vibration Frequencies of a Constrained Flexible Arm
,” J. Sound Vib.
0022-460X, 224
, pp. 808
–841
.11.
Banerjee
, J. R.
, 2000, “Free Vibration of Centrifugally Stiffened Uniform and Tapered Beams Using the Dynamic Stiffness Method
,” J. Sound Vib.
0022-460X, 233
, pp. 857
–875
.12.
Park
, J. H.
, and Kim
, J. H.
, 1999, “Dynamic Analysis of Rotating Curved Beam with a Tip Mass
,” J. Sound Vib.
0022-460X, 228
, pp. 1017
–1034
.13.
Yoo
, H. H.
, and Shin
, S. H.
, 1998, “Vibration Analysis of Rotating Cantilever Beams
,” J. Sound Vib.
0022-460X, 212
, pp. 807
–828
.14.
Rao
, S. S.
, and Gupta
, R. S.
, 2001, “Finite Element Analysis of Rotating Timoshenko Beams
,” J. Sound Vib.
0022-460X, 242
, pp. 103
–124
.15.
Schilhansl
, M. J.
, 1958, “Bending Frequency of a Rotating Cantilever Beam
,” ASME J. Appl. Mech.
0021-8936, 25
, pp. 28
–30
.16.
Pnueli
, D.
, 1972, “Natural Bending Frequency Comparable to Rotational Frequency in Rotating Cantilever Beam
,” ASME J. Appl. Mech.
0021-8936, 39
, pp. 602
–604
.17.
Lee
, S. Y.
, and Kuo
, Y. H.
, 1991, “Bending Frequency of a Rotating Beam with an Elastically Restrained Root
,” ASME J. Appl. Mech.
0021-8936, 58
, pp. 209
–214
.18.
Simo
, J. C.
, and Quoc
, L. V.
, 1987, “The Role of Non-Linear Theories in Transient Dynamic Analysis of Flexible Structures
,” J. Sound Vib.
0022-460X, 119
, pp. 487
–508
.19.
Lin
, S. C.
, and Hsiao
, K. M.
, 2001, “Vibration Analysis of a Rotating Timoshenko Beam
,” J. Sound Vib.
0022-460X, 240
, pp. 303
–322
.20.
Stafford
, R. O.
, and Giurgiutiu
, V.
, 1975, “Semi-Analytic Methods for Rotating Timoshenko Beams
,” Int. J. Mech. Sci.
0020-7403, 17
, pp. 719
–727
.21.
Giurgiutiu
, V.
, and Stafford
, R. O.
, 1977, “Semi-Analytic Methods For Frequencies and Mode-Shapes of Rotor Blades
,” Vertica
0360-5450, 1
, pp. 291
–306
.22.
Lee
, S. Y.
, and Kuo
, Y. H.
, 1992, “Exact Solutions for the Analysis of General Elastically Restrained Nonuniform Beams
,” ASME J. Appl. Mech.
0021-8936, 59
, pp. 205
–212
.23.
Lee
, S. Y.
, and Kuo
, Y. H.
, 1992, “Bending Vibrations of a Rotating Nonuniform Beam With an Elastically Restrained Root
,” J. Sound Vib.
0022-460X, 154
, pp. 441
–451
.Copyright © 2007
by American
Society of Mechanical Engineers
You do not currently have access to this content.
