In this paper, the dynamic response of a penny-shaped interface crack in bonded dissimilar homogeneous half-spaces is studied. It is assumed that the two materials are bonded together with such a inhomogeneous interlayer that makes the elastic modulus in the direction perpendicular to the crack surface is continuous throughout the space. The crack surfaces are assumed to be subjected to torsional impact loading. Laplace and Hankel integral transforms are applied combining with a dislocation density function to reduce the mixed boundary value problem into a singular integral equation with a generalized Cauchy kernel in Laplace domain. By solving the singular integral equation numerically and using a numerical Laplace inversion technique, the dynamic stress intensity factors are obtained. The influences of material properties and interlayer thickness on the dynamic stress intensity factor are investigated.
1.
Williams
, M. L.
, 1959
, “The Stresses Around a Fault or Crack in Dissimilar Media
,” Bull. Seismol. Soc. Am.
, 49
, pp. 199
–204
.2.
Erdogan
, F.
, 1965
, “Stress Distribution in Bonded Dissimilar Materials With Cracks
,” ASME J. Appl. Mech.
, 32
, pp. 403
–410
.3.
Rice
, J. R.
, and Sih
, G. C.
, 1965
, “Plane Problems of Cracks in Dissimilar Media
,” ASME J. Appl. Mech.
, 32
, pp. 418
–423
.4.
Willis
, J. R.
, 1971
, “Fracture Mechanics of Interfacial Crack
,” J. Mech. Phys. Solids
, 19
, pp. 353
–368
.5.
Qu
, J.
, and Bassani
, J. L.
, 1993
, “Interfacial Fracture Mechanics for Anisotropic Bimaterials
,” ASME J. Appl. Mech.
, 60
, pp. 422
–431
.6.
Comninou
, M.
, 1977
, “The Interface Crack
,” ASME J. Appl. Mech.
, 44
, pp. 631
–636
.7.
Achenbach
, J.
, Keer
, L.
, Khetan
, R.
, and Chen
, S.
, 1979
, “Loss of Adhesion at the Tip of an Interface Crack
,” J. Elast.
, 9
, pp. 397
–424
.8.
Rice
, J.
, 1988
, “Elastic Fracture Mechanics Concepts for Interface Cracks
,” ASME J. Appl. Mech.
, 55
, pp. 98
–103
.9.
Shih
, C.
, and Asaro
, R.
, 1988
, “Elastic-Plastic Analysis of Cracks on Bimaterials Interfaces. Part I: Small Scale Yielding
,” ASME J. Appl. Mech.
, 55
, pp. 299
–316
.10.
Hutchinson
, J. W.
, and Suo
, Z.
, 1992
, “Mixed Mode Cracking in Layered Materials
,” Adv. Appl. Mech.
, 29
, pp. 63
–191
.11.
Sih, G. C., and Chen, E. P., 1981, Mechanics of Fracture 6: Cracks in Composite Materials, Martinus Nijhoff, The Hague.
12.
Takei
, M.
, Shindo
, Y.
, and Astumi
, A.
, 1982
, “Diffraction of Transient Horizontal Shear Waves by a Finite Crack at the Interface of Two Bonded Dissimilar Elastic Solids
,” Eng. Fract. Mech.
, 16
, pp. 799
–807
.13.
Li
, D. H.
, and Tai
, W. H.
, 1991
, “Elastodynamic Response of an Interface Crack in a Layered Composite Under Antiplane Shear Impact Load
,” Eng. Fract. Mech.
, 39
, pp. 687
–693
.14.
Ueda
, S.
, Shindo
, Y.
, and Astumi
, A.
, 1983
, “Torsional Impact Response of a Penny-Shaped Crack on a Bimaterial Interface
,” Eng. Fract. Mech.
, 18
, pp. 1059
–1066
.15.
Lambros
, J.
, and Rosakis
, A. J.
, 1995
, “Shear Dominated Transonic Interfacial Crack Growth in a Bimaterial—I Experimental Observations
,” J. Mech. Phys. Solids
, 43
, pp. 169
–188
.16.
Singh
, R. P.
, Lambros
, J.
, and Rosakis
, A. J.
, 1997
, “Investigation of the Mechanics of Intersonic Crack Propagation Along a Bimaterial Interface Using Coherent Gradient Sensing and Photoelasticity
,” Proc. R. Soc. London, Ser. A
, A453
, pp. 2649
–2667
.17.
Xu
, X. P.
, and Needleman
, A.
, 1996
, “Numerical Simulations of Dynamic Crack Growth Along an Interface
,” Int. J. Fract.
, 74
, pp. 289
–324
.18.
Needleman
, A.
, and Rosakis
, A. J.
, 1999
, “The Effect of Bond Strength and Loading Rate on the Conditions Governing the Attainment of Intersonic Crack Growth Along Interfaces
,” J. Mech. Phys. Solids
, 47
, pp. 2411
–2449
.19.
Rosakis
, A. J.
, and Ravichandran
, G.
, 2000
, “Dynamic Failure Mechanics
,” Int. J. Solids Struct.
, 37
, pp. 331
–348
.20.
Subramanian
, R. V.
, and Crasto
, A. S.
, 1986
, “Electrodeposition of a Polymer Interphase in Carbon-Fiber Composites
,” Polym. Compos.
, 7
, pp. 201
–218
.21.
Lugscheider, E., 1987, “Plasma Spraying for Wear Applications,” Thermal Spray: Advances in Coating Technology. Proceedings of the National Thermal Spray Conference. D. L. Houck, ed., ASM International, Materials Park, OH.
22.
Shiau, F. Y., Zuo, Y., Zeng, X. Y., Lin, J. C., and Chang Y. A., 1988, “Interfacial Reactions Between CO and GaAs,” Adhesion in Solids, Material Research Society Symposium, Proc. Vol. 119, D. M. Mattox, J. E. Baglin, R. J. Gottshail, and C. D. Batich, eds., Materials Research Society, Pittsburgh, PA, pp. 171–176.
23.
Kurihara, K., Sasaki, K., and Kawarada, M., 1990, “Adhesion Improvement of diamond films,” FGM’90-Proc. of the First International Symposium on Functionally Graded Materials, M. Yamanouchi, M. Koizumi, T. Hirai, and I. Shiota eds., Functionally Graded Material Forum, Sendai, Japan, pp. 65–69.
24.
Jager, D. A., Stover, D. and H. G. Schutz, 1991, “Plasma Spraying of Graded Composites,” Thermal Spray Coatings: Properties, Processes and Applications. Proceedings of the National Thermal Spray Conference. T. F. Bernecki, ed., ASM International, Materials Park, OH.
25.
Delale
, F.
, and Erdogan
, F.
, 1988
, “On the Mechanical Modeling of the Interfacial Region in Bonded Half Planes
,” ASME J. Appl. Mech.
, 55
, pp. 317
–324
.26.
Ozturk
, M.
, and Erdogan
, F.
, 1995
, “An Axisymmetric Crack in Bonded Materials With an Inhomogeneous Interfacial Zone Under Torsion
,” ASME J. Appl. Mech.
, 62
, pp. 116
–125
.27.
Wang
, X. Y.
, Zou
, Z. Z.
, and Wang
, D.
, 1996
, “On the Griffith Crack in a Inhomogeneous Interlayer of Adjoining Two Different Elastic Materials
,” Int. J. Fract.
, 79
, pp. R51–R56
R51–R56
.28.
Fildis
, H.
, and Yahsi
, O. S.
, 1996
, “The Axisymmetric Crack Problem is a Non-homogeneous Interfacial Region Between Homogeneous Half Spaces
,” Int. J. Fract.
, 78
, pp. 139
–164
.29.
Erdogan, F., 1975, Complex Function Technique, In Continuum Physics, Vol. II, Academic Press, San Diego, CA, pp. 523–603.
30.
Miller
, M. K.
, and Guy
, W. T.
, 1966
, “Numerical inversion of the Laplace transform by use of Jacobi polynomials
,” SIAM (Soc. Ind. Appl. Math.) J. Numer. Anal.
, 3
, pp. 624
–635
.Copyright © 2002
by ASME
You do not currently have access to this content.
