The largest share of electricity production worldwide belongs to steam turbines. However, the increase of renewable energy production has led steam turbines to operate under part load conditions and increase in size. As a consequence long rotor blades will generate a relative supersonic flow field at the inlet of the last rotor. This paper presents a unique experiment work that focuses at the top 30% of stator exit in the last stage of an LP steam turbine test facility with coarse droplets and high wetness mass fraction under different operating conditions. The measurements were performed with two novel fast response probes. A fast response probe for three dimensional flow field wet steam measurements and an optical backscatter probe for coarse water droplet measurements ranging from 30 up to 110μm in diameter. This study has shown that the attached bow shock at the rotor leading edge is the main source of inter blade row interactions between the stator and rotor of the last stage. In addition, the measurements showed that coarse droplets are present in the entire stator pitch with larger droplets located at the vicinity of the stator’s suction side. Unsteady droplet measurements showed that the coarse water droplets are modulated with the downstream rotor blade-passing period. This set of time-resolved data will be used for in-house CFD code development and validation.
- International Gas Turbine Institute
Unsteady Flow Field and Coarse Droplet Measurements in the Last Stage of a Low Pressure Steam Turbine With Supersonic Airfoils Near the Blade Tip
- Views Icon Views
- Share Icon Share
- Search Site
Bosdas, I, Mansour, M, Kalfas, AI, Abhari, RS, & Senoo, S. "Unsteady Flow Field and Coarse Droplet Measurements in the Last Stage of a Low Pressure Steam Turbine With Supersonic Airfoils Near the Blade Tip." Proceedings of the ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition. Volume 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines. Seoul, South Korea. June 13–17, 2016. V008T26A039. ASME. https://doi.org/10.1115/GT2016-57753
Download citation file: