Special Issue paper

Redesigning a Reaction Control Thruster for Metal-Based Additive Manufacturing: A Case Study in Design for Additive Manufacturing

[+] Author and Article Information
Nicholas A. Meisel

School of Engineering Design, Technology, and
Professional Programs,
The Pennsylvania State University,
213J Hammond Building,
University Park, PA 16802
e-mail: nam20@psu.edu

Matthew R. Woods

Xact Metal,
200 Innovation Boulevard,
State College, PA 16802
e-mail: mv2woods@gmail.com

Timothy W. Simpson

Fellow ASME
Department of Mechanical and Nuclear Engineering,
The Pennsylvania State University,
209 Leonard Building,
University Park, PA 16802
e-mail: tws8@psu.edu

Corey J. Dickman

Applied Research Laboratory,
P.O. Box 30 4400D,
State College, PA 16804
e-mail: cjd160@arl.psu.edu

1Corresponding author.

Contributed by the Design for Manufacturing Committee of ASME for publication in the JOURNAL OF MECHANICAL DESIGN. Manuscript received January 30, 2017; final manuscript received May 25, 2017; published online August 30, 2017. Assoc. Editor: Paul Witherell.

J. Mech. Des 139(10), 100903 (Aug 30, 2017) (8 pages) Paper No: MD-17-1073; doi: 10.1115/1.4037250 History: Received January 30, 2017; Revised May 25, 2017

Prior research has shown that powder-bed fusion (PBF) additive manufacturing (AM) can be used to make functional, end-use components from powdered metallic alloys, such as Inconel® 718 superalloy. However, these end-use components and products are often based on designs developed for more traditional subtractive manufacturing processes and do not take advantage of the unique design freedoms afforded by AM. In this paper, we present a case study involving the redesign of NASA’s existing “pencil” thruster used for spacecraft attitude control. The initial pencil thruster was designed for and manufactured using traditional subtractive methods. The main focus in this paper is to (a) identify the need for and use of both opportunistic and restrictive design for additive manufacturing (DfAM) concepts and considerations in redesigning the thruster for fabrication with PBF AM and (b) compare the resulting DfAM thruster with a parallel development effort redesigning the original thruster to be manufactured more effectively using subtractive manufacturing processes. The results from this case study show how developing end-use AM components using specific DfAM guidelines can significantly reduce manufacturing time and costs while enabling new and novel design geometries.

Copyright © 2017 by ASME
Your Session has timed out. Please sign back in to continue.


Gibson, I. , Rosen, D. , and Stucker, B. , 2010, Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing, Springer, New York.
Schmelzle, J. , Kline, E. V. , Dickman, C. J. , Reutzel, E. M. , Jones, G. , and Simpson, T. W. , 2015, “ (Re)Designing for Part Consolidation: Understanding the Challenges of Metal Additive Manufacturing,” ASME J. Mech. Des., 137(11), p. 111404. [CrossRef]
Aumund-Kopp, C. , Isaza, J. , Petzoldt, F. , and Butt, C. , 2014, “ Complex SLM Parts Made of Nickel-Based Alloys: Lessons Learned,” Fraunhofer Direct Digital Manufacturing Conference, Berlin, Mar. 12–13, p. 21.
Ljungblad, U. , Ohldin, P. , and Thundal, S. , 2014, “ Additive Manufacturing With EBM—The Route to Production,” Fraunhofer Direct Digital Manufacturing Conference, Berlin, Mar. 12–13, p. 123.
ASTM, 2012, “ Standard Terminology for Additive Manufacturing Technologies,” American Society for Testing Materials, West Conshohocken, PA, Technical Report No. F2792‐12a. http://web.mit.edu/2.810/www/files/readings/AdditiveManufacturingTerminology.pdf
Samperi, M. , 2014, “ Development of Design Guidelines for Metal Additive Manufacturing and Process Selection,” M.S. thesis, The Pennsylvania State University, University Park, PA. https://etda.libraries.psu.edu/catalog/21832
Thomas, D. , 2009, “ The Development of Design Rules for Selective Laser Melting,” Ph.D. thesis, University of Wales, Cardiff, UK. https://repository.cardiffmet.ac.uk/handle/10369/913
Jee, H. , Lu, Y. , and Witherell, P. , 2015, “ Design Rules With Modularity for Additive Manufacturing,” Annual International Solid Freeform Fabrication Symposium (SFF), Austin, TX, Aug. 10–12, pp. 1450–1462. https://www.nist.gov/publications/design-rules-modularity-additive-manufacturing
Laverne, F. , Segonds, F. , Anwer, N. , and Le Coq, M. , 2015, “ Assembly Based Methods to Support Product Innovation in Design for Additive Manufacturing: An Exploratory Case Study,” ASME J. Mech. Des., 137(12), p. 121701. [CrossRef]
Hanzl, P. , Zetek, M. , Baksa, T. , and Kroupa, T. , 2015, “ The Influence of Processing Parameters on the Mechanical Properties of SLM Parts,” Proc. Eng., 100, pp. 1405–1413. [CrossRef]
Hopkinson, N. , Hague, R. J. M. , and Dickens, P. M. , 2006, Rapid Manufacturing, Wiley, Chichester, UK.
Hildreth, O. J. , Nassar, A. R. , Chasse, K. R. , and Simpson, T. W. , 2016, “ Dissolvable Metal Supports for 3D Direct Metal Printing,” 3D Print. Addit. Manuf., 3(2), pp. 90–97. [CrossRef]
Vayre, B. , Vignat, F. , and Villeneuve, F. , 2012, “ Designing for Additive Manufacturing,” Proc. CIRP, 3, pp. 632–637. [CrossRef]
Contuzzi, N. , Campanelli, S. L. , Casavola, C. , and Lamberti, L. , 2013, “ Manufacturing and Characterization of 18Ni Marage 300 Lattice Components by Selective Laser Melting,” Materials, 6(8), pp. 3451–3468. [CrossRef] [PubMed]
Kantareddy, S. N. R. , Roh, B. M. , Simpson, T. W. , Joshi, S. , Dickman, C. , and Lehtihet, E. A. , 2016, “ Saving Weight With Metallic Lattice Structures: Design Challenges With a Real-World Example,” Solid Freeform Fabrication Symposium (SFF), Austin, TX, Aug. 8–10, pp. 2139–2154. https://sffsymposium.engr.utexas.edu/sites/default/files/2016/171-Kantareddy.pdf
Dede, E. M. , Joshi, S. N. , and Zhou, F. , 2015, “ Topology Optimization, Additive Layer Manufacturing, and Experimental Testing of an Air-Cooled Heat Sink,” ASME J. Mech. Des., 137(11), p. 111403. [CrossRef]
Saunders, M. , 2016, “ Blog Post: How Can You Get the Most From Additive Manufacturing?,” Renishaw, Gloucester, UK, accessed Feb. 7, 2016, http://www.renishaw.com/en/blog-post-how-can-you-get-the-most-from-additive-manufacturing–37556
Hurlbert, E. , McManamen, J. P. , and Studak, J. W. , 2011, “ Advanced Development of a Compact 5-15 Lbf Lox/Methane Thruster for an Integrated Reaction Control and Main Engine Propulsion System,” AIAA Paper No. 2011-6113.
Baumers, M. , Dickens, P. , Tuck, C. , and Hague, R. , 2016, “ The Cost of Additive Manufacturing: Machine Productivity, Economies of Scale and Technology-Push,” Technol. Forecast. Soc. Change, 102, pp. 193–201. [CrossRef]
EOS GmbH, 2016, “ Material Data Sheet—EOS Nickelalloy IN718,” Electro Optical Systems, Krailling, Germany, accessed Feb. 15, 2016, http://ip-saas-eos-cms.s3.amazonaws.com/public/4528b4a1bf688496/ff974161c2057e6df56db5b67f0f5595/EOS_NickelAlloy_IN718_en.pdf
GE Capital, 2013, “ Additive Manufacturing: Redefining What's Possible,” General Electric Corporation, Boston, MA, accessed Feb. 14, 2016, http://www.americas.gecapital.com/GECA_Document/Additive_Manufacturing_Fall_2013.pdf
AcuCut, 2016, “ Wire EDM,” AcuCut, Inc., Southington, CT, accessed Feb. 12, 2016, http://acucut.com/wire.html
Mitchell, W. F. , Lang, D. C. , Merdes, T. A. , Reutzel, E. W. , and Welsh, G. S. , 2016, “ Dimensional Accuracy of Titanium Direct Metal Laser Sintered Parts,” 27th Annual International Solid Freeform Fabrication Symposium, Austin, TX Aug. 8–10, pp. 2029–2042.


Grahic Jump Location
Fig. 1

Process flow diagram for AM production of end-use metallic parts

Grahic Jump Location
Fig. 2

Traditionally manufactured thruster rendering (top) and section view along chamber central axis of redesigned traditionally manufactured thruster (bottom)

Grahic Jump Location
Fig. 9

Assembled AM pencil thruster before (top) and after (bottom) buffing

Grahic Jump Location
Fig. 8

Low density support structure for supporting geometry overhang at the propellant port mating feature

Grahic Jump Location
Fig. 7

Challenging horizontal band setup (left) and strain hardened failed cut attempt (right)

Grahic Jump Location
Fig. 6

As-built AM thruster parts

Grahic Jump Location
Fig. 5

Threaded test modules (left) and assembled threaded AM pencil thruster test piece (right) with plastic welds to demonstrate concept

Grahic Jump Location
Fig. 4

Self-supporting internal channels for propellant delivery

Grahic Jump Location
Fig. 3

Overall model (top) and internal features (bottom) of assembled AM pencil thruster

Grahic Jump Location
Fig. 10

XRCT provided sufficient means of weld inspection to determine if a true seal was produced without significant inclusions or porosity. Section views allowed us to determine if internal channels were clear of debris and had geometry consistently produced as designed in computer-aided design.

Grahic Jump Location
Fig. 11

Comparison of fabricating three pencil thrusters using AM or traditional methods (smaller is better)



Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In