0
Research Papers: Design of Mechanisms and Robotic Systems

Position-Space-Based Compliant Mechanism Reconfiguration Approach and Its Application in the Reduction of Parasitic Motion

[+] Author and Article Information
Haiyang Li

Student Member of ASME
School of Engineering,
University College Cork,
Cork T12K8AF, Ireland
e-mail: haiyang.li@umail.ucc.ie

Guangbo Hao

Mem. ASME
School of Engineering,
University College Cork,
Cork T12K8AF, Ireland
e-mail: G.Hao@ucc.ie

Richard C. Kavanagh

School of Engineering,
University College Cork,
Cork T12K8AF, Ireland
e-mail: r.kavanagh@ucc.ie

1Corresponding author.

Contributed by the Mechanisms and Robotics Committee of ASME for publication in the JOURNAL OF MECHANICAL DESIGN. Manuscript received September 4, 2015; final manuscript received June 14, 2016; published online July 21, 2016. Assoc. Editor: Charles Kim.

J. Mech. Des 138(9), 092301 (Jul 21, 2016) (13 pages) Paper No: MD-15-1618; doi: 10.1115/1.4033988 History: Received September 04, 2015; Revised June 14, 2016

This paper introduces a position-space-based reconfiguration (PSR) approach to the reconfiguration of compliant mechanisms. The PSR approach can be employed to reconstruct a compliant mechanism into many new compliant mechanisms, without affecting the mobility of the compliant mechanism. Such a compliant mechanism can be decomposed into rigid stages and compliant modules. Each of the compliant modules can be placed at any one permitted position within its position space, which does not change the constraint imposed by the compliant module on the compliant mechanism. Therefore, a compliant mechanism can be reconfigured through selecting different permitted positions of the associated compliant modules from their position spaces. The proposed PSR approach can be used to change the geometrical shape of a compliant mechanism for easy fabrication, or to improve its motion characteristics such as cross-axis coupling, lost motion, and motion range. While this paper focuses on reducing the parasitic motions of a compliant mechanism using this PSR approach, the associated procedure is summarized and demonstrated using a decoupled XYZ compliant parallel mechanism as an example. The parasitic motion of the XYZ compliant parallel mechanism is modeled analytically, with three variables which represent any permitted positions of the associated compliant modules in their position spaces. The optimal positions of the compliant modules in the XYZ compliant parallel mechanism are finally obtained based on the analytical results, where the parasitic motion is reduced by approximately 50%. The reduction of the parasitic motion is verified by finite-element analysis (FEA) results, which differ from the analytically obtained values by less than 7%.

Copyright © 2016 by ASME
Your Session has timed out. Please sign back in to continue.

References

Jones, R. V. , 1988, Instruments and Experiences. Papers on Measurement and Instrument Design (Wiley Series in Measurement Science and Technology), Vol. 1, Wiley, Chichester, NY.
Erdman, A. G. , and Sandor, G. N. , 1997, Mechanism Design: Analysis and Synthesis, 3rd ed., Vol. 1, Prentice-Hall, Upper Saddle River, NJ.
Howell, L. L. , 2001, Compliant Mechanisms, Wiley, Hoboken, NJ.
Lobontiu, N. , 2002, Compliant Mechanisms: Design of Flexure Hinges, CRC Press, Boca Raton, FL.
Smith, S. T. , 2003, Foundations of Ultra-Precision Mechanism Design, CRC Press, Boca Raton, FL.
Uicker, J. J. , Pennock, G. R. , and Shigley, J. E. , 2011, Theory of Machines and Mechanisms, Oxford University Press, Oxford, UK.
Hao, G. , Kong, X. , and Reuben, R. L. , 2011, “ A Nonlinear Analysis of Spatial Compliant Parallel Modules: Multi-Beam Modules,” Mech. Mach. Theory, 46(5), pp. 680–706. [CrossRef]
Awtar, S. , Ustick, J. , and Sen, S. , 2012, “ An XYZ Parallel-Kinematic Flexure Mechanism With Geometrically Decoupled Degrees of Freedom,” ASME J. Mech. Rob., 5(1), p. 015001. [CrossRef]
Hao, G. , 2013, “ Towards the Design of Monolithic Decoupled XYZ Compliant Parallel Mechanisms for Multi-Function Applications,” Mech. Sci., 4(2), pp. 291–302. [CrossRef]
Jones, R. V. , 1962, “ Some Uses of Elasticity in Instrument Design,” J. Sci. Instrum., 39(5), pp. 193–203. [CrossRef]
Smith, S. T. , 2000, Flexures: Elements of Elastic Mechanisms, Gordon and Breach Science Publishers, New York.
Meng, Q. , Li, Y. , and Xu, J. , 2014, “ A Novel Analytical Model for Flexure-Based Proportion Compliant Mechanisms,” Precis. Eng., 38(3), pp. 449–457. [CrossRef]
Su, H. , and Yue, C. , 2013, “ Type Synthesis of Freedom and Constraint Elements for Design of Flexure Mechanisms,” Mech. Sci., 4(2), pp. 263–277. [CrossRef]
Kim, D. , Lee, D. Y. , and Gweon, D. G. , 2007, “ A New Nano-Accuracy AFM System for Minimizing Abbe Errors and the Evaluation of Its Measuring Uncertainty,” Ultramicroscopy, 107(4–5), pp. 322–328. [CrossRef] [PubMed]
Schitter, G. , Thurner, P. J. , and Hansma, P. K. , 2008, “ Design and Input-Shaping Control of a Novel Scanner for High-Speed Atomic Force Microscopy,” Mechatronics, 18(5–6), pp. 282–288. [CrossRef]
Gorman, J. J. , and Dagalakis, N. G. , 2003, “ Force Control of Linear Motor Stages for Microassembly,” ASME Paper No. IMECE2003-42079, pp. 615–623.
Hesselbach, J. , Raatz, A. , and Kunzmann, H. , 2004, “ Performance of Pseudo-Elastic Flexure Hinges in Parallel Robots for Micro-Assembly Tasks,” CIRP Ann.—Manuf. Technol., 53(1), pp. 329–332. [CrossRef]
Choi, K.-B. , Lee, J. , Kim, G. , and Lim, H. , 2012, “ A Compliant Parallel Mechanism With Flexure-Based Joint Chains for Two Translations,” Int. J. Precis. Eng. Manuf., 13(9), pp. 1625–1632. [CrossRef]
Kota, S. , Joo, J. , Li, Z. , Rodgers, S. , and Sniegowski, J. , 2001, “ Design of Compliant Mechanisms: Applications to MEMS,” Analog Integr. Circuits Signal Process., 29(1–2), pp. 7–15. [CrossRef]
Tolou, N. , Henneken, V. A. , and Herder, J. L. , 2010, “ Statically Balanced Compliant Micro Mechanisms (SB-MEMS): Concepts and Simulation,” ASME Paper No. DETC2010-28406, pp. 447–454.
Lobontiu, N. , and Garcia, E. , 2005, Mechanics of Microelectromechanical Systems, Springer, Heidelberg, Germany.
Chen, G. , Aten, Q. T. , Zirbel, S. , Jensen, B. D. , and Howell, L. L. , 2009, “ A Tristable Mechanism Configuration Employing Orthogonal Compliant Mechanisms,” ASME J. Mech. Rob., 2(1), p. 014501. [CrossRef]
Culpepper, M. L. , and Anderson, G. , 2004, “ Design of a Low-Cost Nano-Manipulator Which Utilizes a Monolithic, Spatial Compliant Mechanism,” Precis. Eng., 28(4), pp. 469–482. [CrossRef]
Awtar, S. , and Slocum, A. H. , 2006, “ Constraint-Based Design of Parallel Kinematic XY Flexure Mechanisms,” ASME J. Mech. Des., 129(8), pp. 816–830. [CrossRef]
Hao, G. , Li, H. , and Kavanagh, R. , 2015, “ Design of Decoupled, Compact, and Monolithic Spatial Translational Compliant Parallel Manipulators Based on the Position Space,” Proc. Inst. Mech. Eng., Part C, 230, pp. 367–378.
Zhao, H. , Bi, S. , and Yu, J. , 2012, “ A Novel Compliant Linear-Motion Mechanism Based on Parasitic Motion Compensation,” Mech. Mach. Theory, 50, pp. 15–28. [CrossRef]
Jones, R. V. , and Young, I. R. , 1956, “ Some Parasitic Deflexions in Parallel Spring Movements,” J. Sci. Instrum., 33(1), pp. 11–15. [CrossRef]
Hao, G. , 2014, “ A 2-Legged XY Parallel Flexure Motion Stage With Minimised Parasitic Rotation,” Proc. Inst. Mech. Eng., Part C, 228, pp. 3156–3169.
Hao, G. , Li, H. , He, X. , and Kong, X. , 2014, “ Conceptual Design of Compliant Translational Joints for High-Precision Applications,” Front. Mech. Eng., 9(4), pp. 1–13. [CrossRef]
Hao, G. , and Li, H. , 2015, “ Design of 3-Legged XYZ Compliant Parallel Manipulators With Minimised Parasitic Rotations,” Robotica, 33(4), pp. 787–806.
Ni, Z. , Zhang, D. , Wu, Y. , Tian, Y. , and Hu, M. , 2010, “ Analysis of Parasitic Motion in Parallelogram Compliant Mechanism,” Precis. Eng., 34(1), pp. 133–138. [CrossRef]
Polit, S. , and Dong, J. , 2009, “ Design of High-Bandwidth High-Precision Flexure-Based Nanopositioning Modules,” J. Manuf. Syst., 28(2–3), pp. 71–77. [CrossRef]
Li, H. , and Hao, G. , 2015, “ A Constraint and Position Identification (CPI) Approach for the Synthesis of Decoupled Spatial Translational Compliant Parallel Manipulators,” Mech. Mach. Theory, 90, pp. 59–83. [CrossRef]
Li, H. , Hao, G. , and Kavanagh, R. , 2014, “ Synthesis of Decoupled Spatial Translational Compliant Parallel Mechanisms Via Freedom and Actuation Method (FAM),” ASME Paper No. ESDA2014-20196, p. V003T17A004.
Hopkins, J. B. , and Culpepper, M. L. , 2010, “ Synthesis of Multi-Degree of Freedom, Parallel Flexure System Concepts Via Freedom and Constraint Topology (FACT)-Part I: Principles,” Precis. Eng., 34(2), pp. 259–270. [CrossRef]
Hopkins, J. B. , and Culpepper, M. L. , 2010, “ Synthesis of Multi-Degree of Freedom, Parallel Flexure System Concepts Via Freedom and Constraint Topology (FACT)-Part II: Practice,” Precis. Eng., 34(2), pp. 271–278. [CrossRef]
Hopkins, J. B. , 2007, “ Design of Parallel Flexure Systems Via Freedom and Constraint Topologies (FACT),” Ph.D. thesis, Massachusetts Institute of Technology, Cambridge, MA.
Hopkins, J. B. , 2013, “ Designing Hybrid Flexure Systems and Elements Using Freedom and Constraint Topologies,” Mech. Sci., 4(2), pp. 319–331. [CrossRef]
Hopkins, J. B. , and Culpepper, M. L. , 2011, “ Synthesis of Precision Serial Flexure Systems Using Freedom and Constraint Topologies (FACT),” Precis. Eng., 35(4), pp. 638–649. [CrossRef]
Kong, X. , and Gosselin, C. M. , 2007, Type Synthesis of Parallel Mechanisms, Springer-Verlag, Berlin, Germany.
Su, H. , 2011, “ Mobility Analysis of Flexure Mechanisms Via Screw Algebra,” ASME J. Mech. Rob., 3(4), p. 041010. [CrossRef]
Dai, J. S. , Zoppi, M. , and Kong, X. , 2012, Advances in Reconfigurable Mechanisms and Robots I, Springer, Heidelberg, Germany.
Su, H. , Dorozhkin, D. V. , and Vance, J. M. , 2009, “ A Screw Theory Approach for the Conceptual Design of Flexible Joints for Compliant Mechanisms,” ASME J. Mech. Rob., 1(4), p. 041009. [CrossRef]
Li, H. , and Hao, G. , 2015, “ Constraint-Force-Based (CFB) Modeling of Compliant Mechanisms,” ASME Paper No. DETC2015-46481, p. V05AT08A006.
Hao, G. , Kong, X. , Chang, W. , and Luo, X. , 2015, “ Design of Compliant Parallel Grippers Using the Position Space Concept for Manipulating Sub-Millimeter Objects,” 2015 IEEE International Conference on Automation and Computing (ICAC 2015), Glasgow, UK.

Figures

Grahic Jump Location
Fig. 2

An XYZ compliant parallel compliant mechanism and its decomposition: (a) XYZ compliant parallel compliant mechanism, (b) BCMs and their rigid stages, (c) C-BCMs and their rigid stages, (d) basic decomposition pattern, (e) nonbasic decomposition pattern 1, and (f) nonbasic decomposition pattern 2

Grahic Jump Location
Fig. 3

The global and local coordinate systems of the decomposed XYZ compliant parallel mechanism

Grahic Jump Location
Fig. 1

One degree-of-freedom translational compliant mechanisms: (a) basic parallelogram compliant mechanism, (b) compound basic parallelogram compliant mechanism, (c) basic parallelogram compliant mechanism being actuated at its stiffness center, and (d) basic parallelogram compliant mechanism with smaller in-plane thickness and larger spanning size

Grahic Jump Location
Fig. 4

Illustration of principal wrenches in the coordinate system O-XYZ: (a) principal wrenches and (b) linear combination of the principal wrenches

Grahic Jump Location
Fig. 5

The demonstration of the possible positions of the three nonbasic ICMs through the rotations about the local X-axes: (a) the rotation of compliant module-X about the local X-axis and (b) the rotations of compliant module-X, compliant module-Y and compliant module-Z about the local X-axes

Grahic Jump Location
Fig. 10

An optimal design based on the reconfigured XYZ compliant parallel mechanism

Grahic Jump Location
Fig. 11

An XY compliant mechanism and its basic composition pattern: (a) the XY compliant mechanism and (b) the basic composition pattern

Grahic Jump Location
Fig. 12

An XY compliant mechanism reconfigured from the XY compliant mechanism shown in Fig. 11(a), via the translations of the ICMs

Grahic Jump Location
Fig. 14

Comparison between the parasitic rotations of the XY compliant mechanisms shown in Figs. 11(a) and 13

Grahic Jump Location
Fig. 6

Sum of the absolute values of the parasitic rotations, ξm-rxyz, with the rotation angle α: (a) only X direction force applied, (b) only Y direction force applied, and (c) only Z direction force applied

Grahic Jump Location
Fig. 7

Sum of the absolute values of the parasitic rotations, ξm-rxyz, with the rotation angles α and β: (a) only X-direction force applied (fx = 2, fy = 0, and fz = 0), (b) only Y-direction force applied (fx = 0, fy = 2, and fz = 0), and (c) forces in X-and Y-directions applied (fx = 2, fy = 2, and fz = 0)

Grahic Jump Location
Fig. 8

Reconfigured XYZ compliant parallel mechanism with smaller parasitic motions

Grahic Jump Location
Fig. 9

Analysis and FEA results: (a) fy = 0 and fz = 0, (b) fy = 1 and fz = 0, and (c) fy = 1 and fz = 1

Grahic Jump Location
Fig. 13

An XY compliant mechanism reconfigured from the XY compliant mechanism shown in Fig. 11(a), via the rotations of the ICMs

Grahic Jump Location
Fig. 15

Planar parallelogram compliant mechanism and the defined coordinate systems

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In