Ebeling,
C.
, 1997, An Introduction to Reliability and Maintainability Engineering,
McGraw-Hill Companies,
Boston.

Shin,
J.
, and
Lee,
I.
, 2014, “
Reliability-Based Vehicle Safety Assessment and Design Optimization of Roadway Radius and Speed Limit in Windy Environments,” ASME J. Mech. Des.,
136(8), p. 081006.

[CrossRef]
Bichon,
B. J.
,
Eldred,
M. S.
,
Mahadevan,
S.
, and
McFarland,
J. M.
, 2013, “
Efficient Global Surrogate Modeling for Reliability-Based Design Optimization,” ASME J. Mech. Des.,
135(1), p. 011009.

[CrossRef]
Beji,
N.
,
Jarboui,
B.
,
Eddaly,
M.
, and
Chabchoub,
H.
, 2010, “
A Hybrid Particle Swarm Optimization Algorithm for the Redundancy Allocation Problem,” J. Comput. Sci.,
1(2), pp. 159–167.

[CrossRef]
Levitin,
G.
, 2005, Universal Generating Function in Reliability Analysis and Optimization,
Springer-Verlag,
London.

Lai,
M. T.
, and
Chen,
Y. C.
, 2006, “
Optimal Periodic Replacement Policy for a Two-Unit System With Failure Rate Interaction,” Int. J. Adv. Manuf. Technol.,
29(3–4), pp. 367–371.

[CrossRef]
Sun,
Y.
,
Ma,
L.
,
Mathew,
J.
, and
Zhang,
S.
, 2006, “
An Analytical Model for Interactive Failures,” Reliab. Eng. Syst. Saf.,
91(5), pp. 495–504.

[CrossRef]
Wang,
J.
, and
Li,
M.
, 2014, “
Redundancy Allocation for Reliability Design of Engineering Systems With Failure Interactions,” ASME Paper No. DETC2014-34257.

Chryssaphinou,
O.
,
Limnios,
N.
, and
Malefaki,
S.
, 2011, “
Multi-State Reliability Systems Under Discrete Time Semi-Markovian Hypothesis,” IEEE Trans. Reliab.,
60(1), pp. 80–87.

[CrossRef]
Li,
Y. F.
, and
Zio,
E.
, 2012, “
A Multi-State Model for the Reliability Assessment of a Distributed Generation System Via Universal Generating Function,” Reliab. Eng. Syst. Saf.,
106, pp. 28–36.

[CrossRef]
Lisnianski,
A.
,
Elmakias,
D.
,
Laredo,
D.
, and
Ben Haim,
H.
, 2012, “
A Multi-State Markov Model for a Short-Term Reliability Analysis of a Power Generating Unit,” Reliab. Eng. Syst. Saf.,
98(1), pp. 1–6.

[CrossRef]
Lisnianski,
A.
, and
Levitin,
G.
, 2003, Multi-State System Reliability: Assessment, Optimization and Applications,
World Scientific,
Singapore.

Soro,
I. W.
,
Nourelfath,
M.
, and
Ait-Kadi,
D.
, 2010, “
Performance Evaluation of Multi-State Degraded Systems With Minimal Repairs and Imperfect Preventive Maintenance,” Reliab. Eng. Syst. Saf.,
95(2), pp. 65–69.

[CrossRef]
Muhammad,
M.
,
Majid,
A.
, and
Amin,
M.
, 2011, “
Reliability and Availability Evaluation for a Multi-State System Subject to Minimal Repair,” J. Appl. Sci.,
11, pp. 2036–2041.

[CrossRef]
Liu,
Y.
,
Huang,
H.-Z.
,
Wang,
Z.
,
Li,
Y.
, and
Yang,
Y.
, 2013, “
A Joint Redundancy and Imperfect Maintenance Strategy Optimization for Multi-State Systems,” IEEE Trans. Reliab.,
62(2), pp. 368–378.

[CrossRef]
Liu,
Y.
, and
Huang,
H.-Z.
, 2010, “
Optimal Replacement Policy for Multi-State System Under Imperfect Maintenance,” IEEE Trans. Reliab.,
59(3), pp. 483–495.

[CrossRef]
Gen,
M.
, and
Cheng,
R.
, 2000, Genetic Algorithms and Engineering Optimization,
Wiley,
New York.

Ramirez-Marquez,
J. E.
, and
Coit,
D. W.
, 2004, “
A Heuristic for Solving the Redundancy Allocation Problem for Multi-State Series–Parallel Systems,” Reliab. Eng. Syst. Saf.,
83(3), pp. 341–349.

[CrossRef]
Agarwal,
M.
, and
Gupta,
R.
, 2007, “
Homogeneous Redundancy Optimization in Multi-State Series–Parallel Systems—A Heuristic Approach,” IIE Trans.,
39(3), pp. 277–289.

[CrossRef]
Nourelfath,
M.
,
Châtelet,
E.
, and
Nahas,
N.
, 2012, “
Joint Redundancy and Imperfect Preventive Maintenance Optimization for Series–Parallel Multi-State Degraded Systems,” Reliab. Eng. Syst. Saf.,
103, pp. 51–60.

[CrossRef]
Kumar,
V.
,
Tripathi,
M.
,
Pandey,
M.
, and
Tiwari,
M.
, 2009, “
Physical Programming and Conjoint Analysis-Based Redundancy Allocation in Multistate Systems: A Taguchi Embedded Algorithm Selection and Control (TAS&C) Approach,” Proc. Inst. Mech. Eng., Part O,
223(3), pp. 215–232.

Murthy,
D.
, and
Nguyen,
D.
, 1985, “
Study of Two-Component System With Failure Interaction,” Nav. Res. Logist. Q.,
32(2), pp. 239–247.

[CrossRef]
Murthy,
D.
, and
Nguyen,
D.
, 1985, “
Study of a Multi-Component System With Failure Interaction,” Eur. J. Oper. Res.,
21(3), pp. 330–338.

[CrossRef]
Nakagawa,
T.
, and
Murthy,
D. N. P.
, 1993, “
Optimal Replacement Policies for a Two-Unit System With Failure Interactions,” Oper. Res.,
27(4), pp. 427–438.

Zequeira,
R.
, and
Berenguer,
C.
, 2004, “
Maintenance Cost Analysis of a Two-Component Parallel System With Failure Interaction,” Reliability and Maintainability Symposium (RAMS), pp. 220–225.

Augustine,
M.
,
Yadav,
O.
,
Jain,
R.
, and
Rathore,
A.
, 2011, “
An Approach to Capture System Interaction Failures of a Complex System,” Reliability and Maintainability Symposium (RAMS), Lake Buena Vista, FL, Jan. 24–27.

Dobson,
I.
,
Carreras,
B. A.
, and
Newman,
D. E.
, 2004, “
Probabilistic Load-Dependent Cascading Failure With Limited Component Interactions Circuits and Systems,” International Symposium on Circuits and Systems, Vancouver, Canada.

Elsayed,
A.
, 2012, Reliability Engineering,
Wiley, Hoboken,
NJ.

[PubMed] [PubMed]
Levitin,
G.
, 2001, “
Incorporating Common-Cause Failures Into Nonrepairable Multistate Series–Parallel System Analysis,” IEEE Trans. Reliab.,
50(4), pp. 380–388.

[CrossRef]
Maatouk,
I.
,
Chatelet,
E.
, and
Chebbo,
N.
, 2011, “
Reliability of Multi-States System With Load Sharing and Propagation Failure Dependence,” 2011 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (ICQR2MSE), Xi'an, China, June 17–19, pp. 42–46.

Levitin,
G.
, 2004, “
A Universal Generating Function Approach for the Analysis of Multi-State Systems With Dependent Elements,” Reliab. Eng. Syst. Saf.,
84(3), pp. 285–292.

[CrossRef]
Dao,
C. D.
, and
Zuo,
M.
, 2015, “
Reliability Analysis of Multi-State Systems With S-Dependent Components,” 2015 Annual Reliability and Maintainability Symposium (RAMS), Palm Harbor, FL, Jan. 26–29, pp. 1–6.

Levitin,
G.
, and
Xing,
L.
, 2010, “
Reliability and Performance of Multi-State Systems With Propagated Failures Having Selective Effect,” Reliab. Eng. Syst. Saf.,
95(6), pp. 655–661.

[CrossRef]
Xing,
L.
, and
Levitin,
G.
, 2011, “
Combinatorial Algorithm for Reliability Analysis of Multi-State Systems With Propagated Failures and Failure Isolation Effect,” IEEE Trans. Syst., Man, Cybernet., Part A: Syst. Humans,
41(6), pp. 1156–1165.

[CrossRef]
Levitin,
G.
,
Xing,
L.
,
Ben-Haim,
H.
, and
Dai,
Y.
, 2011, “
Multi-State Systems With Selective Propagated Failures and Imperfect Individual and Group Protections,” Reliab. Eng. Syst. Saf.,
96(12), pp. 1657–1666.

[CrossRef]
D'Amico,
G.
,
Janssen,
J.
, and
Manca,
R.
, 2009, “
Semi-Markov Reliability Models With Recurrence Times and Credit Rating Applications,” J. Appl. Math. Decis. Sci.,
2009, p. 625712.

[CrossRef]
Distefano,
S.
,
Longob,
F.
, and
Trivedi,
K.
, 2012, “
Investigating Dynamic Reliability and Availability Through State–Space Models,” Comput. Math. Appl.,
64(12), pp. 3701–3716.

[CrossRef]
Malefaki,
S.
,
Limnios,
N.
, and
Dersin,
P.
, 2014, “
Reliability of Maintained Systems Under a Semi-Markov Setting,” Reliab. Eng. Syst. Saf.,
131, pp. 282–290.

[CrossRef]Hildalgo, E. M. P., Silva, D. W. R., and de Souza, G. F. M., 2013, “
Application of Markov Chain to Determine the Electric Energy Supply System Reliability for the Cargo Control System of LNG Carriers,” ASME Paper No. OMAE2013-11388.

Veeramany,
A.
, and
Pandey,
M.
, 2011, “
Reliability Analysis of Nuclear Component Cooling Water System Using Semi-Markov Process Model,” Nucl. Eng. Des.,
241(5), pp. 1799–1806.

[CrossRef]
Veeramany,
A.
, and
Pandey,
M.
, 2011, “
Reliability Analysis of Nuclear Piping System Using Semi-Markov Process Model,” Ann. Nucl. Energy,
38(5), pp. 1133–1139.

[CrossRef]
Lee,
S.
,
Li,
L.
, and
Ni,
J.
, 2013, “
Markov-Based Maintenance Planning Considering Repair Time and Periodic Inspection,” ASME J. Manuf. Sci. Eng.,
135(3), p. 031013.

[CrossRef]
Zhong,
C.
, and
Jin,
H.
, 2014, “
A Novel Optimal Preventive Maintenance Policy for a Cold Standby System Based on Semi-Markov Theory,” Eur. J. Oper. Res.,
232(2), pp. 405–411.

[CrossRef]
Tomasevicz,
C.
, and
Asgarpoor,
S.
, 2009, “
Optimum Maintenance Policy Using Semi-Markov Decision Processes,” Electric Power Syst. Res.,
79(9), pp. 1286–1291.

[CrossRef]
Butenko,
V.
, 2014, “
Modeling of a Reactor Trip System Using Markov Chains: case Study,” ASME Paper No. ICONE22-31156.

Limnios,
N.
, and
Oprisan,
G.
, 2001, Semi-Markov Processes and Reliability,
Springer, New York.

D'Amico,
G.
, 2011, “
Age-Usage Semi-Markov Models,” Appl. Math. Modell.,
35(9), pp. 4354–4366.

[CrossRef]
Ardakan,
M.
, and
Hamadani,
A.
, 2014, “
Reliability–Redundancy Allocation Problem With Cold-Standby Redundancy Strategy,” Simul. Modell. Pract. Theory,
42, pp. 107–118.

[CrossRef]
Ahmadizar,
F.
, and
Soltanpanah,
H.
, 2011, “
Reliability Optimization of a Series System With Multiple-Choice and Budget Constraints Using an Efficient Ant Colony Approach,” Exp. Syst. Appl.,
38(4), pp. 3640–3646.

[CrossRef]
Georgiopoulos,
P.
,
Jonsson,
M.
, and
Papalambros,
P.
, 2005, “
Linking Optimal Design Decisions to the Theory of the Firm—The case of Resource Allocation,” ASME J. Mech. Des.,
127(3), pp. 358–366.

[CrossRef]
Huang,
C.
,
Lo,
J.
,
Kuo,
S.
, and
Lyu,
M.
, 2004, “
Optimal Allocation of Testing-Resource Considering Cost, Reliability, and Testing-Effort, Dependable Computing,” 10th IEEE Pacific Rim International Symposium on Dependable Computing, Mar. 3–5, pp. 103–112.

Ramirez-Marquez,
J.
,
Coit,
D. W.
, and
Konak,
A.
, 2004, “
Redundancy Allocation for Series–Parallel Systems Using a Max–Min Approach,” IIE Trans.,
36(9), pp. 891–898.

[CrossRef]
Kartik,
S.
, and
Siva Ram Murthy,
C.
, 1995, “
Improved Task-Allocation Algorithms to Maximize Reliability of Redundant Distributed Computing Systems,” IEEE Trans. Reliab.,
44(4), pp. 575–586.

[CrossRef]
Allella,
F.
,
Chiodo,
E.
, and
Lauria,
D.
, 2005, “
Optimal Reliability Allocation Under Uncertain Conditions, With Application to Hybrid Electric Vehicle Design,” Int. J. Qual. Reliab. Manage.,
22(6), pp. 626–641.

[CrossRef]
Jacobson,
D.
, and
Arora,
S.
, 1996, “
Simultaneous Allocation of Reliability and Redundancy Using Simplex Search,” Reliability and Maintainability Symposium, International Symposium on Product Quality and Integrity, Las Vegas, NV, June 22–25, pp. 243–250.

Levitin,
G.
, and
Lisnianski,
A.
, 2001, “
Optimal Separation of Elements in Vulnerable Multi-State Systems,” Reliab. Eng. Syst. Saf.,
73(1), pp. 55–66.

[CrossRef]
Garg,
H.
, and
Sharma,
S. P.
, 2013, “
Multi-Objective Reliability-Redundancy Allocation Problem Using Particle Swarm Optimization,” Comput. Ind. Eng.,
64(1), pp. 247–255.

[CrossRef]
Cai,
T.
, and
Freiheit,
T.
, 2014, “
Resource Allocation for Lean Product Development Using a Value Creation Cell Model,” ASME J. Mech. Des.,
136(10), p. 101701.

[CrossRef]
Haider,
S. I.
,
Burton,
L.
, and
Joshi,
Y.
, 2006, “
A Reduced Order Modeling Framework for Thermal Modeling of Shipboard Power Electronics Cabinets,” AIAA Paper No. 2006-3610.

Jin,
X.
, and
Hong,
Y. J.
, 2007, System Reliability and Availability Analysis,
National Defense Industry Press,
Beijing, China.

Ericsson, 2010, Reliability Aspects on Power Supplies,
Ericsson Power Modules Design Note 002, Kista, Sweden.

Sikos,
L.
, and
Klemeš,
J.
, 2010, “
Reliability, Availability and Maintenance Optimization of Heat Exchanger Networks,” Appl. Therm. Eng.,
30(1), pp. 63–69.

[CrossRef]
Wang,
J.
, and
Li,
M.
, 2014, “
Improve System Reliability and Robustness Using Axiomatic Design and Fault Tree Analysis,” ASME Paper No. DETC2014-34259.

Dieter,
G.
, and
Schmidt,
L.
, 2008, Engineering Design, 4th ed.,
McGraw-Hill, Boston, MA.