0
RESEARCH PAPERS

A Full Kinematic Model of Thread-Starting for Assembly Automation Analysis

[+] Author and Article Information
Stephen Wiedmann

Southwest Research Instituteswiedmann@swri.org

Bob Sturges

Industrial & Systems Engineering,Virginia Techsturges@vt.edu

J. Mech. Des 128(1), 128-136 (Mar 29, 2005) (9 pages) doi:10.1115/1.2114907 History: Received May 18, 2004; Revised March 29, 2005

This work addresses the geometry of threaded fastener insertion at a detailed level in order to determine the nature of contact between a bolt and nut during the initial phases of thread mating. The assembly problem was modeled as a constrained three-dimensional analysis to gain an understanding about how contacts between the bolt and nut change during the thread starting counterclockwise motion. We introduce a fully detailed thread profile model which is parametrically adaptable to all practical thread forms. From this geometric representation, we derive contact state maps graphically represented as axial discs. From these maps we show the phase relationship of the bolt and nut in the critical thread-starting process. This model is based on the premise that an unspecified active or passive device will be employed for correcting alignment errors. The model serves to visualize the contact conditions which could lead to wedging and jamming events, and provides one component for such analyses.

FIGURES IN THIS ARTICLE
<>
Copyright © 2006 by American Society of Mechanical Engineers
Your Session has timed out. Please sign back in to continue.

References

Figures

Grahic Jump Location
Figure 1

Internal and external thread profiles

Grahic Jump Location
Figure 2

General thread cross section

Grahic Jump Location
Figure 3

Negative root fillet

Grahic Jump Location
Figure 5

Initial orientation of bolt and nut

Grahic Jump Location
Figure 6

Contact region combination disk

Grahic Jump Location
Figure 7

Contact points at ϕ=30

Grahic Jump Location
Figure 9

Pivot axis position vs phase angle

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In