0
TECHNICAL PAPERS

Dynamic Responses of a Globoidal Cam System

[+] Author and Article Information
Jao-Hwa Kuang, Ah-Der Lin, Tzong-Yow Ho

Department of Mechanical and Electromechanical Engineering, National Sun Yat-Sen University, Kaohsiung 80424, Taiwan, R.O.C.

J. Mech. Des 126(5), 909-915 (Oct 28, 2004) (7 pages) doi:10.1115/1.1767182 History: Received August 01, 2003; Revised February 01, 2004; Online October 28, 2004
Copyright © 2004 by ASME
Your Session has timed out. Please sign back in to continue.

References

Chen,  F. Y., 1977, “A Survey of the State of the Art of Cam System Dynamic,” Mech. Mach. Theory, 12, pp. 201–224.
Chakraborty, J., and Dhande, S. G., 1977, Kinematics and Geometry of Planar and Spatial Cam Mechanisms, Wiley, New York.
Pisano,  A. P., and Freudenstein,  F., 1983, “An Experimental and Analytical Investigation of the Dynamic Response of a High-Speed Cam-Follower System. Part 1: Experimental Investigation,” ASME J. Mech. Des., 105, pp. 692–698.
Pisano,  A. P., and Freudenstein,  F., 1983, “An Experimental and Analytical Investigation of the Dynamic Response of a High-Speed Cam-Follower System. Part 2: A Combined, Lumped/Distributed Parameter Dynamic Model,” ASME J. Mech. Des., 105, pp. 699–704.
Yan,  Hong-Sen, and Chen,  Hsin-Hung, 1994, “Geometry Design and Machining of Roller Gear Cams With Cylindrical Rollers,” Mech. Mach. Theory, 29(6), pp. 803–812.
Tsay,  D. M., and Hwang,  G. S., 1994, “Application of the Theory of Envelope to the Determination of Camoid Profiles With Translating Followers,” ASME J. Mech. Des., 116, pp. 320–325.
Tsay,  D. M., and Lin,  B. J., 1996, “Improving the Geometry Design of Cylindrical Cams Using Nonparametric Rational B-Splines,” Comput.-Aided Des., 28(1), pp. 5–15.
Tsay,  D. M., and Ho,  H. C., 2001, “Consideration of Manufacturing Parameters in the Design of Grooved Globoidal Cam Indexing Mechanisms,” J. Mech. Eng. Sci., 215, pp. 95–103.
Tsay,  D. M., Huang,  M. H., and Ho,  H. C., 2002, “Producing Follower Motions Through Their Digitized Cam Contours,” ASME J. Computing and Information Science in Engineering,2, pp. 98–105.
Nishioka,  M., and Uchino,  M., 1993, “Compensation of Input Shaft Torque on Indexing Cam Mechanism (II),” Trans. Jpn. Soc. Mech. Eng., Ser. C, 59(562), pp. 311–317.
Nishioka,  M., 1994, “Compensation of Input Shaft Torque on Indexing Cam Mechanisms,” Trans. Jpn. Soc. Mech. Eng., Ser. C, 60(569), pp. 338–342.
Nishioka,  M., and Takamura,  M., 1995, “Direct Torque Compensation Cam Mechanisms (1st Report),” Trans. Jpn. Soc. Mech. Eng., Ser. C, 61(585), pp. 266–270.
Tsay,  D. M., Ho,  H. C., and Wang,  K. C., 2002, “Design of Torque Balancing Cams for Globoidal Cam Indexing Mechanisms,” ASME J. Mech. Des., 124(3), pp. 441–447.
Kuang, J. H., and Lin, J. F., 1994, “Accelerometer Pair Measurements for Shaft Dynamic Parameters Analysis,” 12th International Modal Analysis Conference, Honolulu, pp. 1649–1655.
Tsay,  D. M., and Wei,  H. M., 1996, “A General Approach to the Determination of Planar and Spatial Cam Profiles,” ASME J. Mech. Des., 118, pp. 259–265.
Chen, F. Y., 1982, Mechanics and Design of Cam Mechanisms, Pergamon Press, New York.
Church, J. A., and Soni, A. H., 1971, Proc. of the Appl. Mech. Conf., No. 41.

Figures

Grahic Jump Location
A globoidal cam with six cylindrical rollers
Grahic Jump Location
The discrete model of a globoidal cam, a coupling and a shaft
Grahic Jump Location
The discrete model of a globoidal cam system
Grahic Jump Location
The variation in the roller mesh stiffness at different input angle
Grahic Jump Location
Layout of the measurement setup
Grahic Jump Location
Angular acceleration of the flywheel in a roller engagement period
Grahic Jump Location
Angular accelerations of the flywheel for a globoidal cam device with different cam profile curves
Grahic Jump Location
Angular accelerations of the flywheel at an input speed of 60 rpm
Grahic Jump Location
Variation in the residual vibration amplitude at different operating speeds
Grahic Jump Location
Angular acceleration responses of the flywheel at a transient operating speed

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In