0
TECHNICAL PAPERS

Transmission Error in Helical Timing Belt Drives (Case of a Period of Pulley Pitch)

[+] Author and Article Information
Masanori Kagotani, Hiroyuki Ueda

Department of Mechanical Engineering, Osaka Sangyo University, 3-1-1, Nakagaito, Daito-shi, Osaka, 574-8530 Japan

Tomio Koyama

Department of Mechanical Engineering, Osaka Institute of Technology, 5-16-1, Omiya, Asahi-ku, Osaka, 535-8585 JapanE-mail: koyama@med.oit.ac.jp

J. Mech. Des 123(1), 104-110 (Feb 01, 2000) (7 pages) doi:10.1115/1.1326916 History: Received February 01, 2000
Copyright © 2001 by ASME
Your Session has timed out. Please sign back in to continue.

References

Ueda,  H., Kagotani,  M., Koyama,  T., and Nishioka,  M., 1999, “Noise and Life of Helical Timing Belt Drives,” ASME J. Mech. Des., 121, No. 2, pp. 274–279.
Ueda, H., Kagotani, M., and Koyama, T., 1999, “Side Tracking of Helical Timing Belt Drives (In Case of No Load),” Proceedings of the 4th World Congress on Gearing and Power Transmission, 2 , pp. 1349–1356.
Kagotani, M., Ueda, H., and Koyama, T., 1999, “Transmission Error in Helical Timing Belt Drives (Effect of Belt Side Tracking),” Proceedings of the 4th World Congress on Gearing and Power Transmission, 2 , pp. 1327–1336.
Koyama,  T., Kagotani,  M., Shibata,  T., Sato,  S., and Hoshiro,  T., 1981, “A Study on Strength of Toothed Belt (6th report, Behavior of Belt and Pulley Teeth at Incomplete Meshing Region),” Bull. Jpn. Soc. Mech. Eng.,24, No. 194, pp. 1500–1506.
Gerbert, B. G., 1992, “Driven Pulley Jumping of Timing Belts,” ASME Proceedings of the 1992 International Power Transmission and Gearing Conference, DE-Vol. 43-2, pp. 489–493.
Kagotani,  M., Aida,  T., Koyama,  T., Sato,  S., and Hoshiro,  T., 1982, “A Study on Transmission Characteristics of Toothed Belt Drives (1st report, Effect of Initial Tension on Tight Side and Slack Side Tensions),” Bull. Jpn. Soc. Mech. Eng.,25, No. 201, pp. 459–466.
Koyama,  T., Kagotani,  M., Shibata,  T., Sato,  S., and Hoshiro,  T., 1980, “A Study on Strength of Toothed Belt (4th report, Load Distribution in Case of Considering Incomplete Meshing,” Bull. Jpn. Soc. Mech. Eng.,23, No. 181, pp. 1235–1239.
Kagotani,  M., Aida,  T., Koyama,  T., Sato,  S., and Hoshiro,  T., 1983, “A Study on Transmission Characteristics of Toothed Belt Drives (2nd report, Transmission Error under a State of Applied Initial Tension, Theoretical Analysis),” Bull. Jpn. Soc. Mech. Eng.,26, No. 211, pp. 132–139.
Kagotani, M., Koyama, T., and Ueda, H., 1991, “A Study on Transmission Error in a Synchronous Belt Drive with Eccentric Pulley (Effect of Eccentric Phase Angle of Pulley and Belt Width),” Proceedings of the International Conference on Motion and Power Transmission (MPT ’91), The Japan Society of Mechanical Engineers, pp. 363–367.
Kagotani,  M., Koyama,  T., and Ueda,  H., 1993, “A Study on Transmission Error in Timing Belt Drives (Effect of Production Error in Polychloroprene Rubber Belt),” ASME J. Mech. Des., 115, No. 4, pp. 1038–1043.

Figures

Grahic Jump Location
Belt tooth number of helical timing belt constituted by very narrow belts
Grahic Jump Location
Meshing model between belt and pulley teeth of very narrow belt
Grahic Jump Location
Meshing model of belt climbing at beginning of meshing
Grahic Jump Location
Meshing condition for one belt revolution of very narrow belt
Grahic Jump Location
Meshing model for one belt revolution of helical timing belt
Grahic Jump Location
Experimental apparatus for transmission error
Grahic Jump Location
Measurement position of belt climbing
Grahic Jump Location
Dimensions of test belt (a) and pulleys (b)
Grahic Jump Location
Experimental result for belt climbing on driving and driven pulleys
Grahic Jump Location
Experimental results for average and amplitude of belt climbing
Grahic Jump Location
Experimental and computed results of transmission error
Grahic Jump Location
Influence of helix angle on transmission error
Grahic Jump Location
Influence of belt width on transmission error
Grahic Jump Location
Relationship between helix ratio and transmission error
Grahic Jump Location
Influence of installation tension on transmission error

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In