A Mechanics-Based Computer Algorithm for Displaying the Margin of Static Stability in Four-Legged Vehicles

[+] Author and Article Information
J. K. Davidson

Department of Mechanical and Aerospace Engineering, Arizona State University, Tempe, AZ 85287

G. Schweitzer

Institut für Robotik, Swiss Federal Institute of Technology, ETH Zentrum, CH-8092 Zürich, Switzerland

J. Mech. Des 112(4), 480-487 (Dec 01, 1990) (8 pages) doi:10.1115/1.2912635 History: Received September 01, 1989; Online June 02, 2008


The subject of this paper is the application of screw-mechanics and geometry to determine the potential upset of computer-controlled four-legged vehicles which are under development for use in very uneven terrain by the European construction and forestry industries. The margin of static stability is measured using normalized values for virtual power, each value corresponding to the motion about an axis of rotation which is associated with one mode of potential overturning. Static stability is treated for spatial positioning of the feet and for both three and four feet in contact with the ground. External reaction loads at the tool are included, and the load from a tethering cable-which arrangement can also be included. The inertial loads from a heavy tool, such as an excavating arm, can be included in a quasi-static manner. The values for normalized virtual power are then related to a geometrical description of stability of the vehicle as if it were operating on level ground. Recommendations are made for visually displaying the geometrical description to the operator of the machine. The required measurements of force and position are listed.

Copyright © 1990 by The American Society of Mechanical Engineers
Your Session has timed out. Please sign back in to continue.






Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In